Quick Installation Guide

Configuration Guide

I. Connecting PT420 and Login

Please follow the instructions step by step to complete the setup successfully.

TOPOLOGY

SETUP STEPS

1. Power on PT420, CONNECT PT420 WAN port to PoE switch using a RJ45 cable.

2. LOGIN the Router with DHCP server, check DHCP release table and find the IP released to PT420.

Assume PT420 WAN IP is 192.168.1.100.

3. OPEN Chrome or Firefox web browser and go to URL link:

http://192.168.1.100:8080

4. ENTER default Username, root. Leave Password as blank. PRESS Login.