User Manual

Packet Power™ Smart Power Cable User’s Manual
Copyright 2012 © Packet Power, LLC.
8
7
The cable should now be energized and the indicator lights
and LED display will be active. The Smart Power Cable will
immediately attempt to join the wireless network (if available)
and transmit power data.
8
Power up any devices.
DISCLAIMER
Installation of Packet Power monitoring cables involves the disruption of power flow to your devices. Disconnecting power supply cables on
running computing equipment and other electrical devices may lead to interruption of service, data loss, equipment damage and other
potential losses. Packet Power is not responsible for any losses incurred due to power interruptions during the installation process. The
customer is responsible for understanding and mitigating any consequences of interrupting and re-starting power flow to any equipment
during the installation process. Installation should only be performed by personnel otherwise authorized to manage power connections to
the equipment to be monitored. Dual-powered (“A & B”) devices can in some cases be connected live, with one side (e.g. “A”) being
replaced first, followed by the other side (e.g. “B”). However, any time one of the power supplies is disconnected, the redundancy of a dual
power supply and all of the protections it provides against failure are compromised. You are responsible for completely understand-ing this
risk and taking responsibility for any consequences of a power loss while connecting power cables.