User Manual

CAUTION!
 Read all instructions carefully prior to installation.
 The AC to 5V DC power supply shall utilize appropriate overcurrent protection.
 The Wireless Current Monitor must only be connected to a low voltage 5 VDC
power source. Do not connect directly to any line sources.
 Certain current transformers (CTs) connected to this device may have
dangerously high voltage present on their terminals or leads when monitoring live
loads.
 Always shut AC power off when connecting the power supply.
 Always shut AC power off when connecting or disconnecting the CTs to the
current monitor or placing CTs around a conductor.
 Only qualified electrical personnel with the correct protective equipment shall
place the current transducers on to AC conductors.
 No field-serviceable parts. Do not attempt to disassemble the product. Installation
and maintenance must be performed by qualified personnel.
 Follow basic safety precautions to reduce the risk of electrical shock and damage
to equipment.
 Intended for indoor use only, do not install in a wet location.
 Adhere to all local and national electrical codes and guidelines when installing
this product.
 Failure to use the product in the specified manner may lead to injury or death and
damage to equipment.