User Manual

Packet Power™ Wireless Current Monitoring Module Manual
Copyright 2009-2013 Packet Power, LLC.
9
Middle small light (red)
 2.4 GHz radio activity
o off: disabled
o solid on: active, not connected
o slow flashing: active, connected to the mesh network
o rapid flashing: connected in near communication mode
o very rapid flashing: test/configuration mode
Lower small light (green)
 Power monitoring activity
o off: power monitor disabled or not functional
o slow flashing: active, monitoring power
o very rapid flashing: test/configuration mode
Maintenance and Repair
Maintenance
The CMM has no user-serviceable parts and requires no maintenance. If necessary, clean
the outside of the PMM using a clean, dry cloth.
Repair
The PMM contains no field-serviceable components. Failed products should be returned to
Packet Power for replacement. For any service or repair information please contact Packet
Power at [e-mail]. Please be sure to enclose the 16-character serial
number.
Technical Specifications
Electrical
Communications
Operating Frequency 860 to 920MHz (frequencies specific to
region) and 2.4 GHz
Wireless Network Protocol Frequency hopping self-configuring load-
balancing mesh
Data output (Gateway) SNMP and Modbus TCP/IP protocols (one IP
address needed per Gateway); optional EMX
cloud or local energy management system
Firmware updates Wireless
Typical transmission range 10 to 30 meters indoors (extended by
relaying through any other Packet Power
wireless device)
Antenna Fully enclosed, fixed configuration