User Manual

Packet Power™ Wireless Smart DC Monitoring System Manual
Copyright 2015 © Packet Power, LLC.
5
Wireless Voltage Monitors
The Wireless Voltage Monitor is used to sense the voltage on the DC bus and transmit the
information wirelessly to the Gateway. The monitor is designed to utilize the sensing / line
voltage as a power source facilitating a very simple installation. Typical installations only
require a single voltage monitor for the entire DC bus.
Wireless Voltage Monitor (P5C-DCV1) Models
Product Numbe
r
Input
V
oltage Range
P5C-DCV1L 5-24V (max. 36V)
P5C-DCV1H 48V (max. 65V)
P5C-DCV1HV 100-200V
P5C-DCVHZ 100-400V
Power Usage is less than 0.25 W per device.
WARNING: The voltage supply sensors are only provided for acquiring power and
voltage for the monitoring device and not intended to sustain the load current path.
Display Module / Wireless Hub
The Display Module displays values for all monitors within rage. It can also act as a Wireless
Hub or “repeater” for modules housed inside a metallic enclosure or in areas that limit the
radio propagation. Note that this module requires a 5VDC source which is typically provided
by universal power supply.
Display Module / Wireless Hub
Wireless Voltage Monitor