User Manual

Packet Power™ Wireless Smart DC Monitoring System Manual

DC Input Supply Harness: The DC Input Supply Harness is designed to bring power from

the DC bus to the first Current Monitor. This harness is designed with a bare wire end for

connection to a DC voltage source. The other end utilizes a 2 pin polarized connector and

can terminate on either of the two DC source points on the modules as these connections

are common to allow daisy chain connections for the power source.

Always make sure the polarity and voltage are correct before connecting the harness

to a module.

DC Input Supply Harness

Module Interconnect Harness: The module interconnect harnesses facilitate sharing a

power source between multiple modules. The harnesses are terminated with 2 pin polarized

connectors and are available in different lengths. The connector can terminate on either of

the two DC source points on the modules as these connections are common.

Remote CT Harness: When using

remote CT versions of the current sensing

modules, the remote CT is connected

with a three pin polarized connector to the

remote CT. Harnesses may be field

extended if required or can be ordered in

specific lengths.