User Manual

Packet Power™ Wireless Smart DC Monitoring System Manual
Copyright 2015 © Packet Power, LLC.
8
Module Mounting Options
DIN RAIL: The DIN Rail mounting kit provides a means
to mount the modules using standard DIN rail. The back
of the module(s) is fitted with a standard 35mm DIN rail.
Up to two modules can be mounted to a single rail.
ADHESIVE: Modules can be mounted using the available high strength adhesive tabs.
When mounting using adhesive tabs, the opposing surface must be clean, dry and have a
suitable mating surface.
MECHANICAL: Modules are available with mounting tabs. The mounting tabs can be used
to mechanically fasten the modules using wire ties, screws or other mechanical fasteners.
3.50
[.138]
12.00
[.472]
42.80
[1.685]
Wireless Monitor mechanical mounting tabs.
DIN rail mounts affix to the base of the
modules.