User Guide

NEC Versa M340/E2000 Disassembly Manual
Page 11
Removing the WLAN Card Module
To remove the WLAN Card Module first remove the battery (see Removing the Battery) and
remove the Keyboard (see Removing the Keyboard) then perform the following steps:
3. Release all screws on heat plate as shown in Fig. 11
Fig. 11 Heat Plate
4. Remove the wireless antenna connector and release the WLAN Card Module as shown in
Fig. 12
Fig. 12 Wireless Card Module
A = M2.5x5 Silver
B = M2.5x5 Black