User Guide

4
Packard Bell EasyNote S Disassembly Manual
Removing the Battery
Perform the following steps to remove the battery:
1. Make sure to power off the EasyNote S.
2. Disconnect the AC adapter (and all other peripherals) from the unit.
3. Turn the unit upside down.
4. Unlock the battery compartment and slide it out of its place.
Fig. 1 Releasing the battery.
Removing the Hard Disk Drive
To remove the hard disk drive, then perform the following steps:
1. Remove the 2 screws securing the hard disk drive cover on the front side.
2. Remove the 2 silver coloured screws underneath.
Fig. 2 Removing the 2 silver coloured screws.
3. Pull out the Mylar folded inside the drive bay.
4. Carefully slide the hard disk drive out.