Operation Manual

Packard Bell EasyNote R Series Disassembly Manual

Page 7

2. Unscrew the HDD module and disconnect it as shown below

Fig. 4 Disconnecting the hard disk drive

3. Unscrew the four screws on both sides of the hard disk drive as shown below

Fig. 5 Unscrewing the hard disk drive shield screws

Removing the Optical Disk Drive

To remove the ODD, first remove the battery then the HDD Cover. Then do as follows:

1. Release screw as shown below and pull out ODD module.

Fig. 6 Removing the optical drive

M2.5x7 Black

M3x4 Sliver

M2.5x5 Black