Operation Manual

Packard Bell EasyNote R Series Disassembly Manual
Page 23
5. Remove two screws at the VGA port to separate Main Board from System Bracket.
Fig. 37 Releasing System Bracket
Removing the Multi Card Reader (optional)
To remove the Multi Card Slot, first remove the Main Board (see Removing the Main Board),
then perform the following steps:
1. Unscrew the screws on the Multi Card Slot assembly as shown below and remove the
Multi Card Slot from the Main Board.
Fig. 38 Multi Card Slot
M3x7 Silver
M2x3.5 Black