Manualshelf

Operation Manual

ManualsBrandsPackard Bell ManualsNotebookEasyNote MV
11121314151617181920
18
USB/TV-Out/DC-Board
1. Follow all steps for the mainboard
up to step 8.
2. Remove the screw holding the USB/TV-Out/DC-Board.
3. Lift the board and disconnect both cables.
TV Aerial Connector (Optional)
1. Follow all steps outlined above for the USB/TV-Out/DC-Board
.
2. Remove the 2 screws holding the aerial connector.
Touchpad
1. Follow all steps for the mainboard up to step 8.
2. Push the touchpad from the top cover; it is glued.
- Note: The touchpad buttons are not part of the touchpad, but they are integrated on the
mainboard. The movable parts are integrated in the top cover.