Product Manual

CAUTION: USE OF CONTROLS, ADJUST-
MENTS OR PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
PLS180 complies with US FDA
standards, 21 CFR, Subchapter J.
These labels are attached to
every PLS laser. These are
not to be removed or defaced.
PLS • 2550 KERNER BLVD., SAN RAFAEL, CA 94901
800 601 4500
AVOID EXPOSURE
LASER RADIATION
EMITTED FROM
THIS APERTURE
CAUTION
LASER RADIATION
DO NOT STARE INTO BEAM OR VIEW
DIRECTLY WITH OPTICAL INSTRUMENTS
MAX OUTPUT POWER <1mW
WAVELENGTH 635-670nm
CLASS II LASER PRODUCT
WARNING LABEL
BACK
FRONT
APERTURE
LABEL
ID# CERTIFICATION LABEL
•
ON/OFF MENU
SWITCH
•
BATTERY DOOR
•
1/4 X 20 INSERT
IN BASE OF EACH UNIT
•
USE EITHER
3 AA 1.5V
ALKALINE OR
RECHARGEABLE
BATTERIES
•
OPTIC WINDOWS
•
MAGNETIC
WALL BRACKET
•
POUCH
•
PLS SLD G
LASER DETECTOR
PLS180 and PALM LASER are
registered trademarks of
PLS
•
PACIFIC LASER SYSTEMS
PLS180 Patent Pending
FEATURES
MENU SWITCH
SAFETY LABELING
PLS180 Palm Laser
Green Beam
®
PACIFIC LASER
SYSTEMS
The Professional Standard
O
PERATING
M
ANUAL
PRESS “ON ” TO SCROLL THROUGH THE MENU.
THE NUMBERS INDICATE MENU FUNCTIONS:
1. LEVEL/HORIZONTAL BEAM / GREEN LED
2. PLUMB/VERTICAL BEAM / GREEN LED
3. BOTH BEAMS - SELF-LEVELING / GREEN LED
4. BOTH BEAMS - FIXED / RED LED
5. OFF
• UNLESS THE PLS180 G IS ON NUMBER 4 MODE, UNIT
WILL NOT OPERATE IF TILT EXCEEDS 6
O
OUT OF LEVEL.
• AMBER LED = LOW BATTERY
• PLS180 G MENU SAME AS ABOVE. PRESS “PULSE ON”
BUTTON TO ACTIVATE PULSED BEAM TO USE OUT-
DOORS WITH PLS SLD G LASER DETECTOR.
• FLASHING LED INDICATES LASER IS PULSING AND
CAN BE USED WITH PLS SLD G LASER DETECTOR.
• PULSED BEAM WILL BE LESS BRIGHT THAN
NON-PULSED BEAM.
GLOBALLY SOURCED. FINAL ASSEMBLY IN U.S.A.
PATENT #6,930,380 1-800-661-4600
PLS 2550 KERNER BLVD., SAN RAFAEL, CA 94901
DATE:
S/N:
CLASS 2 LASER PRODUCT
PLS180 COMPLIES WITH FDA. STDS. 21. CFR.,
CHAP. J 1040.10 & 11 EXCEPT FOR DEVIATION
PURSUANT TO LASER NOTICE .60 OF 7/26/2006