User's Manual

HOW TO SCAN SLIDES
STEP 1 – Acquire Driver
(For PC Users)
Open CyberView from the desktop icon
Alternatively Start button Scroll to the letter C category look for CyberView X
Vista/XP - Start – All Programs – CyberViewX
(For MAC Users)
Open Macintosh Hard drive – Applications – CyberViewX
STEP 2 – Select Film Type
Select the film type to be scanned – Positive (Slides), Negative (mounted negatives) or
mounted B&W negatives (Black and White).
STEP 3 – Optional Prescan
Select the “Prescan Current Frame“ to prescan the slide currently
loaded into the scanner or “Prescan...“ to prescan slide or slides at
specific positions in the magazine.
10
P
r
e
-
S
canning
should
be
used
t
o
manually
adjust
c
olor/
crop area,
exposure settings etc. for each slide before doing the final scan. It’s
possible to set different settings for each slide to be scanned.
Please note : With older cardboard mounts the optional Pre-Scan
can put a lot of wear and tear on already decaying slide mounts,
pre-scan is ONLY required if you plan to pre-edit all or some of the
images manually before final scanning, otherwise use the available
automatic correction features to do it for you, and skip
prescanning altogether