User's Manual

Additional hardware features….

Manual Front Control

Panel

– Push buttons on the front of the scanner

a. You can advance or reverse the slide tray by pressing the navigation

buttons

or scan manually using the scan button to perform one button

scanning, CyberView X must be open to use this button.

Please Note: When installing your new scanner onto a Windows system that

already has

other USB Flatbed scanner or All-in-one

Scan/Copier/Printer

device installed, it may be

necessary

for you to power off or even disconnect or

the other scanner from the USB port for the Film scanner to work

properly,

One Button

Scan

1. Open the CyberView X application (Ref. page 16 to acquire the CyberView software)

2. Configure Scan Settings (see Page

17)

Configure the scan settings: Select the Scan to directory, file format

(TIF or JPG) Magic Touch/Auto Color etc., once configured, Press

the

scanner button ( ) to begin

scanning.

NOTE: If you do not open CyberView FIRST, the scan button will not

function.

c. Slide

Viewer – Backlit slide viewer (Not scanning display)

The scanner has a built in mini light panel which allows the slides to

man

ually previewed with a backlight before inserting into the tray

for

scanning.

Insert the slide into the slide viewer for previewing. The scanner has

switched on. Gently press down on the top of the slide to

engage the

back

light for viewing the

slide.

Mini Light

Panel

Manual Control Panel