Instructions / Assembly
PRIOR TO INSTALLING HARDWARE
PARTS LIST
rev. 6-10-17
page 2 of 5 - continued -
1. Standoff 10
2. Hex Bolt, Washer & Nut 8
3. T-Guide 2
4. J-Hook / Hanger 4
5. End Stop 2
6. Anti-jump Disc 4
7. Hex Head Lag Bolt 10
8. Track Connector Screws 4
9. Track Connector Bracket 1
10. Track 2
11. Allen Wrench 1
1. Ensure door clearances (figure 1).
2. Install flat, no profile, head casing (not included with barn door hardware kit) securely mounted into the wall studs
prior to installing the Barn Door hardware. The head casing should be a minimum of 6-1/4” tall x 3/4” thick x 160”
long (figure 2). This piece should be made of hardwood that can withstand 150lbs. of weight. IT IS CRITICAL this
piece be secured in the studs and level for proper travel of the barn door.
3. Finish Head Casing prior to starting Hardware install.
Figure 2
1
8
9
2 3 4 5
6
7
10
11
place
door slab
on the
oor in
front of
door
opening
Figure 1
MINIMUM 6” between
top of door and ceiling line
or bottom of crown
moulding (if present)
MINIMUM
6-1/4” x 3/4” x 160”
head casing