Instructions / Assembly

2
/
2
1.1 Place the left armrest (B) on its side.
Align the seat & back (C) to the left armrest.
Attach the seat & back to the left armrest with washers
(CC) and bolts (BB) using hex wrench (EE).
1.2 Follow the above steps to attach the right armrest (A).
CC
AA
DD
FRONT
D
1.3 Place the seat & back upside down on the smooth
surface.
Align the U-bar (D) to the bottom of the seat.
Attach the U-bar to the seat with washers (CC) and bolts
(AA) using hex wrench (EE).
Fully tighten all the bolts and cover them with bolt caps
(DD).
1.4 Insert the shaft of the U-bar into the cylinder of the
chair base (E) until an audible click is heard.
Repeat Steps 1.1~1.4 for the other swivel rocher.
2.1 Place the left armrest (B1) on its side.
Align the seat & back (C1) to the left armrest.
Attach the seat & back to the left armrest with
washers (CC) and bolts (BB) using hex wrench (EE).
Do not fully tighten bolts until the end of Step 2.3.
2.3 Place the seat & back upside down on the smooth
surface.
Align the cross bar (D1) to armrests (A1) and (B1).
Attach the cross bar to armrests (A1) and (B1) with
washers (CC) and bolts (AA) using hex wrench (EE).
Fully tighten all the bolts and cover them with bolt caps
(DD).
2.4 Turn the chair upright.
Repeat Steps 2.1~2.4 for the other three dining chairs.
BB
CC
DD
BB
CC
DD
BB
CC
DD
BB
CC
DD
AA
CC DD
B
B1
C
C1
A
2.2 Follow the above steps to attach the right armrest (A1).
D1
E
A1