User guide

AeGISNPB7000P Page17

3. Enter the person name up to 16-characters.
Press # after entering each letter, see
(Keypad Function and Layout page 14).
Press ## after entering last letter. The screen
will show
4. Enter the phone number 4-digit relay number,
then press #,
Phone number is 4-digit relay number
for example 0001, 0002, …….0996 (max)
5. Enter 4-digit access code then press #.
Repeat step 1 to program another tenant.
02
EDITING TENANT DIRECTORY
Must be in programming mode, see Two ways to
Log-on to programming mode: on page 15
1. Enter function code 02 then press #
2. Enter 2, 3 or 4 digit directory to be edited
3. Enter the person name up to 16-digit. Press #
after entering each letter see ( Keypad
Function and Layout page 14). Press ##
after entering last letter. The screen will show
4. Enter telephone number up to 11 digit, then
EntertheName
_____________
PH#:___________
AccessCode:____
EnterDir:__
_
EntertheName
_____________
PH#:___________
NOTE:PRESS#TOKEEPEXISTING
INFORMATION
NOTE:DIRECTORYMUSTBEUNIQUEFOR
EACHTENANTOTHERWISETHEDISPLAY
WILLSHOW
DIR#isused!
NOTE:IFDIRECTORYDOESNOTEXIST,THE
DISPLAYWILLSHOW
DIRnotexist!
WARNING:IFTHEDIRECTORYIS
USEDTOPROGRAMTHE4‐DIGITACCESS
CODEORTELEPHONENUMBERWITHOUT
NAME,THENYOUMUSTKNOWTHE
DIRECTORYCODETODELETETHE4‐DIGIT
ACCESSCODEORPHONENUMBER.IFTHE
DIRECTORYISFORGOTTEN,YOUMUST
ERASETHESYSTEMTOFACTORYDEFAULT.