User guide
FUNCTION CODE LOCAL PROGRAMMING
71
ENABLE NO PHONE BILL
Only enable for no phone bill
systems NPB9000P and NPB7000P
78
VIEW DIRECTORY AND NAME
Step 1 Log on to programming mode (see section 3.1). The display shows
Step 2 Enter Function Code 71 then press # and the display shows
Step 3 Press 1 to enable no phone bill the press
Step 1 Log on to programming mode (see section 3.1). The display shows
Step 2 Enter Function Code 78 then press # and the display shows
NNNNNNNNN= tenant name
Step 3 Press # to view the tenant code (directory code), the display shows
NNNNNNNNNNNN= tenant name
XXXX= 2-digit, 3-digit or 4-digit tenant code (directory code) associated with
the name.
Step 4 Press 3 to proceed to next tenant name and return to step 3 or proceed to
step 5 or press
*
and the display shows
Step 5 Select another Function Code to program different field from the table or
press
*
to exit the programming mode.
Pach and Company Chapter 3 Page 29
AeGIS 9000P Series PROGRAMMING
NNNNNNNNNNN
DIR No: XXXX
SELECT PROGRAM
ENTER: _ _ PRESS #
SELECT PROGRAM
ENTER: _ _ PRESS #
NNNNNNNNNNNN
Press # to view
SELECT PROGRAM
ENTER: _ _ PRESS #
NoPhoneBill:
0=NO 1=YES: 0