Manual

AeGIS7000P Page21
Chapter 4
SYSTEM’S OPERATION
A. How to view tenant’s directory
1. Press (scroll A-Z) or
2. Press (scroll Z-A)
B. How to initiate a call from the system
Two ways to initiate a call
1. By scrolling (see A, press 3 or 6 to scroll) then
press # to call
2. By directory, press # (wait for dial tone) then
press the tenant’s directory number.
C. How to release the door remotely
1. Establish a communication
2. Tenant must press 9 to release the door.
D. How to make a call to an extension or voice
mail
1. Established a communication
2. Press the voice mail or extension number
using the system’s keypad.
E. How to extend talk time
Talk time is set using function code 70 (10-180
seconds), see p18.
1. Establish a communication
2. Warning beep will be heard 10 minutes before
the talk time expired.
3. Press # to extend the talk time
F. How to call into the system
You must know the system’s phone number
1. Call the system’s phone number
2. The system will answer between 2
nd
- 4
th
rings,
then BEEP BEEP! will be heard
3. Press to establish communication
4. Press 9 to release the door.
NOTE:VISITORMUSTKNOWTHETENANT’S
DIRECTORYNUMBER
ALTHOUGH,THESYSTEMISTESTED
WITHMOSTPHONES,COMPATIBILITYISSUE
MAYSTILLBEOCCURRED,ESPECIALLYWITH
VOICEOVERIP(VOIP)PHONE.

PULSEPHONEWILLNOTWORK