Spec Sheet

SELF-PRIMING ‘T’ PUMPS
BULLETIN
PP-627D
May 2015
EXCELLENT FOR PUMPING SOFT SOLIDS, DIRTY WATER, SALT
WATER AND MANY OTHER EFFLUENTS AROUND THE FARM,
ON THE WATER OR AT THE JOB SITE.
CURVE MODEL ENGINE PORT SIZE MAX. FLOW MAX. TDH WT.
Q TE2QBB E6VC K 6.5HP B&S Vanguard 2” 240 GPM 83’ (36 psi) 85 lbs
TE2QBB E5HC K Honda GX 160 85 lbs
T TE3TBB E8VC K 8 HP B&S Vanguard 3” 360 GPM 78’ (33 psi) 116 lbs
TE3TBB E8HC K 8 HP Honda GX 240 120 lbs
PUMP:
• Pump is constructed of corrosion
resistant polyester with urethane
coated impeller and volute.
• Buna-N elastomers and wearplate.
• Stainless steel fasteners and quick-
release band clamp for easy clean out.
• Available in 2” or 3” for maximum
fl ows.
• Self-priming with vertical suction lift to
25 feet.
• Rough service oil lubricated silicon
carbide shaft seal.
• Includes 2” or 3” zinc coated suction
strainer.
ENGINE:
• 2” pump is available with Briggs &
Stratton 6.5 HP Vanguard (Commercial
Power) engine with 3 year engine
warranty, or Honda GX 160 Series
OHV Commercial Series
• 3” pump is available with either Briggs
& Stratton 8HP Vanguard or Honda
8 HP GX 240 OHV Commercial Series.
2”
3”
PUMP SPECIFICATIONS
41 Industrial Circle 800-233-3861
Lancaster PA 17601-5927 717-925-8240
www.pacerpumps.com Fax: [phone]
Email: [e-mail]