Product Manual

ITEM # PART # GROUP PART DESCRIPTION QTY./PUMP ITEM # PART # PART DESCRIPTION QTY./PUMP
15 58-0704 30 A IMPELLER, 3 Vane, .535” wide 5.5” dia.,
Polyester, black 1
58-0704 40 A IMPELLER, 3 Vane, .535”wide 5.5” dia.,
Polypropylene, grey 1
58-0704 60 A IMPELLER, 3 Vane, .535” wide 5.5” dia.,
Ryton, brown 1
58-0706 30 A IMPELLER, 5 Vane, .535”wide 5.5” dia.,
Polyester, black 1
58-0706 40 A IMPELLER, 5 Vane, .535”wide 5.5” dia.,
Polypropylene, grey 1
58-0706 60 A IMPELLER, 5 Vane, .535” wide 5.5” dia.,
Ryton, brown 1
58-0974 30 B IMPELLER, 4 Vane, .600” wide 4.75”dia.,
Polyester, black 1
58-0974 40 B IMPELLER, 4 Vane, .600”wide 4.75”dia.,
Polypropylene, grey 1
58-0974 60 B IMPELLER, 4 Vane, .600”wide 4.75”dia.,
Ryton, brown 1
58-0975 30 C IMPELLER, 4 Vane, .975”wide, 4.75”dia.,
Polyester, black 1
58-0975 40 C IMPELLER, 4 Vane, .975”wide, 4.75”dia.,
Polypropylene, grey 1
58-0975 60 C IMPELLER, 4 Vane, .975”wide, 4.75”dia.,
Ryton, brown 1
58-0667 30 B IMPELLER, 3 Vane, .535”wide, 4.75”dia.,
Polyester, black 1
58-0667 40 B IMPELLER, 3 Vane, .535”wide, 4.75”dia.,
Polypropylene, grey 1
58-8706 30 IMPELLER, 5 Vane, .535” w. 5.5” d, black
Polyester (8hp pumps only, 7/2003) 1
58-8975 30 IMPELLER, 4 vane, .975” w x 4.75” d, black
Polyester, (8hp pumps only, 7/2003) 1
16 58-0716 10 SCREW, Impeller,S.S., 5/16”-24x.75” 1
58-1668 10 SCREW, Impeller, S.S.,3/8-24x1” (8hp only) 1
17 58-0702 30 A VOLUTE, Flat, Polyester 1
58-0702 60 A VOLUTE, Flat, Ryton, brown 1
58-0773 31 A VOLUTE, Buna-N lined Polyester 1
58-0773 32 A VOLUTE, EPDM lined Polyester 1
58-0954 30 B VOLUTE, Flat, Polyester 1
58-0954 60 B VOLUTE, Flat, Ryton, brown 1
58-0955 31 B VOLUTE, Buna-N lined Polyester 1
58-0955 32 B VOLUTE, EPDM lined Polyester 1
58-0977 30 C VOLUTE, Flat, Polyester 1
58-0977 60 C VOLUTE, Flat, Ryton, brown 1
58-0978 31 C VOLUTE, Buna-N lined Polyester 1
58-0978 32 C VOLUTE, EPDM lined Polyester 1
18 58-0725 10 SCREW, side volute, S.S., #6-cc x.5” long as
required
19 58-0771 10 A SCREW, top volute, S.S.,#10-24x1.5” as
required
58-0997 10 B,C SCREW, top volute, S.S., #10-24 x .5” as
required
20 58-0705 71 CHECK VALVE, Buna-N 1
58-0705 72 CHECK VALVE, EPDM 1
58-0705 73 CHECK VALVE, VITON 1
21 58-1206 SCREW, Body, plated steel 1/4”-20 x 2-3/8” 10
58-1206 10 SCREW, Body, SS, 1/4”-20 x 2-3/8” long 10
22 58-1009 71 O-RING, Drain Plug, Buna-N 1
58-1009 72 O-RING, Drain Plug, EPDM 1
58-1009 73 O-RING, Drain Plug, VITON 1
23 58-0723 30 PLUG, Drain, Polyester, black 1
58-0723 40 PLUG, Drain, Polypropylene, grey 1
58-0723 60 PLUG, Drain, Ryton, brown 1
24 58-0722 30B PLUG, Filler, Polyester, black 1
58-0722 40 PLUG, Filler, Polypropylene, grey 1
58-0722 60 PLUG, Filler, Ryton, brown 1
25 58-0765 71 O-RING, Filler plug, Buna-N 1
58-0765 72 O-RING, Filler plug, EPDM 1
58-0765 73 O-RING, Filler plug, VITON 1
27 58-0718 KEY, steel 1
58-0718 10 KEY, stainless steel 1
58-0718 30 KEY, Polyester 1
30 58-0778 11 SHIM, .006”, stainless steel as required
58-0778 12 SHIM, .015”, stainless steel as required
58-0778 13 SHIM, .030”, stainless steel as required
58-46338 10 SHIM, .015”, S.S. (8hp only) as required
31 58-1014 10 ADAPTER, shaft, for close-coupled electric or
pneumatic motor, stainless steel, .625” bore 1
58-1165 10 ADAPTER, S.S., for hydraulic motor, .563”
bore 1
32 58-0883 SET SCREW, 1/4”-20 x .25” long, steel 2
33 58-0745 KEPNUT, 5/16”-18, plated steel 4
35 58-1011 20 PEDESTAL, hydraulic motor, molded plastic 1
36 58-0729 H SCREW, for mounting hydraulic motor to pedestal,
5/16”-18 x 1.0” long, plated steel 4
38 58-1826 71 PAD, Rubber, Saddle 1
39 58-1828 90 SADDLE, Electric motor, 6-5/8” dia. motor 1
58-1825 90 SADDLE, 5-11/16” diameter motor 1
40 58-1823 40 BASEPLATE, for close-coupled electric motors,
molded plastic 1
41 58-0934 10 STRAP, for close-coupled electric motors, SS 1
42 58-1001 30B BODY, 1-1/2” NPT, Polyester, black 1
58-1001 40 BODY, 1-1/2” NPT, Polypropylene, grey 1
58-1001 60 BODY, 1-1/2” NPT, Ryton, brown 1
58-1002 30B BODY, 2” NPT, Polyester, black 1
58-1002 40 BODY, 2” NPT, Polypropylene, grey 1
58-1002 60 BODY, 2” NPT, Ryton, brown 1
58-0755 30B BODY, 3” NPT, Polyester, black 1
58-0755 40 BODY, 3” NPT, Polypropylene, grey 1
58-0755 60 BODY, 3” NPT, Ryton, brown 1
58-0943 30B BODY, 1-1/2” BSP, Polyester, black 1
58-0784 30B BODY, 2” BSP, Polyester, black 1
58-0877 30B BODY, 3” BSP, Polyester, black 1
43 58-1015 10 SCREW, hex head cap, 3/8”-16x1.25” long, S.S 4
44 58-1010 20 ADAPTER, Motor, for pump close-coupled to
electric or pneumatic motor, molded plastic 1
45 58-1955 71 SEAL, lip, .710” ID, Buna-N 2
58-1955 73 SEAL, lip, .710” ID, VITON 2
46 58-0882 90 SHAFT, Sleeve, Polyethylene 1
47 58-0884 71 SLINGER, Buna-N 1
48 58-1951 90 HOUSING, Bearing, cast metal 1
49 58-1954 90 BEARING, Ball, .787” ID 2
50 58-1952 10 SHAFT, stainless steel, .75” diameter 1
58-1952 91 SHAFT, Hastelloy, .75” diameter 1
58-1952 93 SHAFT, Titanium, .75” diameter 1
51 58-1953 10 PLATE, End, stainless steel 1
52 58-0730 10 FLAT WASHER, .563”, stainless steel 2
53 58-0729 10 SCREW, 5/16”-18 x 1”, stainless steel 2
54 58-0745 10 KEPNUT, 5/16”-18, stainless steel 2
55 58-0759 20 BEARING Pedestal, molded plastic 1
56 58-0777 BEARING, Shaft Assy., standard, carbon steel 1
58-0777 10 BEARING, Shaft Assy., with S.S. shaft sleeve 1
55,56 58-2053 01 ASSEMBLY, Pedestal, 3/4” carbon steel shaft 1
58-2053 02 ASSEMBLY, Pedestal, with S.S. shaft sleeve 1
57 58-1956 10 SHIM, Bearing Shaft, cast metal pedestal, .006”
thick as required
58 58-2525 10 SCREW, hex, 1/4”-20 x 3/4” stainless steel 4
59 58-1950 01 BEARING & PEDESTAL ASSY., with 3/4” S.S.
shaft (includes items 45, 48, 49, 50, 51, 57 & 58) 1
58-1950 01H BEARING & PEDESTAL ASSY., with 3/4” Hastelloy
shaft (includes items 45, 48, 49, 50, 51, 57 & 58) 1
58-1950 01T BEARING & PEDESTAL ASSY., with 3/4” Titanium
shaft (includes items 45, 48, 49, 50, 51, 57 & 58) 1
60 58-0686 MOTOR, Hydraulic 1
61 58-0634 ENGINE, B&S, Series 550 1
58-0644 ENGINE, B&S INTEK Series 850 1
58-0635 GC ENGINE, Honda, GC 160 1
58-0635 H ENGINE, Honda, GX 160 1
58-0646 V ENGINE, B&S, 6.5HP, Vanguard 1
58-0967 ENGINE, B & S, INTEK Pro, 305cc 1
62 58-0926 MOTOR, pneumatic 1
63 58-0028 BASEPLATE KIT, standard duty, call factory for
details 1
58-0016 BASEPLATE KIT, heavy duty, call factory for
details 1
64 58-0933 72 GASKET, Engine Protection, EPDM, 3.5HP only 1
58-0935 72 GASKET, Engine Protection, EPDM, INTEK only 1
65 58-0929 BASE PLATE, for pumps coupled to pneumatic
motor 1
66 58-0002 BASE RUNNER KIT, two steel rails with fasteners 1
67 SUCTION STRAINER, see Bulletin PA-206Q
68 58-0009 ROLL CAGE, w/rubber feet, mounting hardware 1
69 58-0008 WHEELED CART, for most engine driven pumps 1
NOTE: All specifi cations, as shown, are subject to change without previous notice.
PACER
®
PUMPS
Div. ASM Industries, Inc.
serving
industry
worldwide
(Printed in U.S.A.)
41 Industrial Circle 717-656-2161
Lancaster, PA 17601-5927 800-233-3861
Email: [e-mail] FAX: [phone]
www.pacerpumps.com
“S” SERIES PUMP PARTS LIST
PP-9900G
Distributed By:
6