Spec Sheet

ManualsBrandsPacer ManualsElectric120 GPM (2") 2 HP End Suction Electric Chemical Pump (208/230/460V 3-Phase)

Bulletin

PP-107K

Jan. 2018

SERIES ‘PC’

HORIZONTAL PUMPS

INDUSTRY • AGRICULTURE •

MARINE • AQUACULTURE

pumping, transferring or recirculating of ACIDS /

PLATING SOLUTIONS / PHOTOGRAPHIC CHEMICALS

/ FUME SCRUBBER / WASTEWATER / ETCHING AND

CLEANING SOLUTIONS

Tank truck unloading.

Many uses in agriculture and

aquaculture. Recirculation, ﬁ lter

systems, transfer from totes

and tanks.

Many industrial uses. Solution

transfer, ﬁ lter systems, fume

scrubbing, off-loading tanker

trucks.

• AVAILABLE MOLDED FROM: Glass reinforced Polyester (PCE*),

Polypropylene (PCP*), Ryton

(PCR*) or Noryl (PCN*).

* Represents the ﬁ rst three characters in model number which

specify the material of construction.

• NON-METALLIC SOLUTION CONTACT MODELS AVAILABLE IN

ALL STOCK MATERIALS.

• FLOWS TO 230 US GPM or 94 FT. TDH @ 60 Hz. (725 LPM or 20 M

@50 Hz).

• SELECTION OF DRIVES - TEFC electric motor, Hydraulic or

pneumatic motors or gasoline engines.

• 1-1/2”, 2”, 3” NPT THREADED PORTS.

1-1/2”, 2” BSP THREADS AVAILABLE.

Impeller numbers are indicated on curve. NOTE: pump

performance is slightly greater with engine drive (3600

rpm) See chart on next page.

PUMP SPECIFICATIONS:

All major pump parts are precision molded

of tough, corrosion resistant glass reinforced ther-

moplastics. These high strength plastics provide

resistance to many acids, bases, solvents and salt

water at temperatures as high as 200 degrees F

(93C). Available with EPDM, Buna or Viton elasto-

mers and stainless steel fasteners. Also available

with non-metallic solution contact option. Consult

factory.

The 1-1/2” and 2” models are the same

pump with both ports threaded 1-1/2” female and

2” male. The 3” model has male threads only. For

abrasive solutions, the Polyester and Noryl models

are available with a Buna-N or EPDM rubber wear-

plate.

Pumps may be ordered with a chemically

resistant Noryl bearing pedestal for long coupled

direct drive or a cast iron pedestal for belt drive and

heavy duty service. Close coupled drives include

electric, hydraulic or pneumatic motor and gasoline

engines through 8 hp. All available from stock.

Summary of content (2 pages)

PAGE 1
SERIES ‘PC’ HORIZONTAL PUMPS Bulletin PP-107K Jan. 2018 INDUSTRY • AGRICULTURE • MARINE • AQUACULTURE pumping, transferring or recirculating of ACIDS / PLATING SOLUTIONS / PHOTOGRAPHIC CHEMICALS / FUME SCRUBBER / WASTEWATER / ETCHING AND CLEANING SOLUTIONS • AVAILABLE MOLDED FROM: Glass reinforced Polyester (PCE*), Polypropylene (PCP*), Ryton® (PCR*) or Noryl (PCN*). * Represents the first three characters in model number which specify the material of construction.
PAGE 2
Bulletin PP-107K Jan. 2018 Consult factory for models with materials of construction other than EPDM and polyester as shown below. Long coupled to electric motor PUMP WITH ELECTRIC DRIVE CURVE A B C D E F PORT **MAXIMUM MAXIMUM REQUIRED MODEL SIZE FLOW RATE TDH HP NUMBER in. GPM LPM Ft. Meters 60Hz 1½-2 1½-2 1½-2 1½-2 1½-2 3 70 220 90 285 120 380 150 475 180 570 230 725 30 6.5 32 7 70 15 90 19 94 20 70 15 .