Spec Sheet
41 Industrial Circle 800-233-3861
Lancaster PA 17601-5927 717-656-2161
www.pacerpumps.com Fax: 717-656-0477
Email: sales@pacerpumps.com
BULLETIN
PP-631D
FEB. 2015
page 2
SERIES ‘I’ SELF-PRIMING PUMP specifi cations
Pump with electric, hydraulic or pneumatic drive close-coupled
or pedestal mounted for fl exible coupling
Pump constructed with stainless steel housing. Glass reinforced internal parts, stainless steel housing clamp
and internal fasteners, EPDM elastomers and check valve, polypropylene baseplate with close-coupled
electric motors, steel baseplate with close-coupled hydraulic and pneumatic models. Motor shafts are ex-
tended with 316SS shaft adapter. Consult factory for polypropylene and Ryton® internal components
PEDESTAL MOUNTED
CLOSE COUPLED
ELECTRIC
GASOLINE ENGINE
PNEUMATIC
HYDRAULIC
FLOW PORT MAX. MAX. HP Hz MODEL PRICE ADD TO MODEL &
CURVE SIZE FLOW TDH REQ’D NUMBER CODE PRICE CODE NO...
LETTER RATE NUMBER ELECTRIC MOTOR 60 Hz
(RPM) in. GPM LPM ft. m 115/230/V/1/60 230/460V/3/60
TEFC TEFC
G (3450) 1
1/2
/2 170 -- 72 -- 3 60 ISE2GL- 58-52G4 C3.0C D3.0C
G (2850) “ -- 580 - 16 2 50* ISE2GL - 58-52G4 HYDRAULIC PNEUMATIC
G (3450) 1
1/2
/2 170 650 72 22 3 -- ISE2GL - 58-52G4 HYC --
G (2900) 1
1/2
/2 140 530 50 15 2 -- ISE2GL - 58-52G4 -- -PNC
FLOW PORT MAX. MAX. HP SHIP MODEL PRICE ADD TO MODEL &
CURVE SIZE FLOW TDH REQ’D WT. NUMBER CODE PRICE CODE NO...
LETTER RATE NUMBER GASOLINE ENGINE
(RPM) in. GPM LPM ft. m
4.0 HP 5.5 HP
W (3600) 1
1/2
/2 170 650 75 23 3 or 5 50 ISE2WL- 58-52W4 E4CP E5ICP (B&S)
E5HCP (HONDA)
* Consult factory for 50 Hz motors
PUMP WITH GASOLINE ENGINE DRIVE
Pump constructed with 316 stainless steel housing. Glass reinforced polyester internal parts, 304 stainless steel hous-
ing clamp, 316 SS internal fasteners, EPDM O-rings, gasket, and check valve. Engine shaft shielded with heat shrink
polyethylene tubing.
NOTE: All gasoline engine drive SERIES ‘I’ pumps come with roll cage as shown.
FLOW CURVES
ELECTRIC MOTOR DRIVEN
GASOLINE ENGINE DRIVEN
Flow curves based on water S.G. = 1.0, 2” connections
Specifi cations subject to change without notice


