Spec Sheet

-1
-2
-3
-4
-5
-6
-7
-8
-A
-B
-C
-E
-M
-N
-R
-S
-T
FPC-1.0
FPC-0.2
FC1.0
FC-0.2
-1
-2
-3
-4
-5
-6
-7
-8
-A
-B
-C
-E
-M
-N
-R
-S
-T
59-0011
59-0013
59-0012
59-0014
PRICE
CODE NO.
PRICE
CODE NO.
59-0001
59-0002
59-0003
59-0004
59-0005
59-0006
59-0007
59-0008
For point-of-use dispensing / filtering of water and chemicals* used for:
ELIMINATES "DUMPING" & SPILLING OF SOLUTIONS
The HAND DISPENSING PUMP is a double acting piston
type which will handle a wide range of solutions. The pump body,
valves, valve seats and piston are all made of chemically re-sis-
tant, performance engineered plastics, especially compounded
to give the pump strength and rigidity. All internal metal parts
in contact with the liquid are made of 316 stainless steel. The
"O"-ring and gasket materials are cork-nitrile, Viton® or EPDM
(ethylene propylene).
All pumps include a 2" NPT bung adapter.
TO ORDER PUMP with 2" BUNG ADAPTER
(Order hoses and suction tube to complete assembly)
"O"-RING
VITON
VITON
EPDM
VITON
VITON
EPDM
VITON
EPDM
MODEL
HPV
HPN
HPE
HRV
HRN
HRE
HHV
HHE
POLYESTER
GLASS
REINFORCED
RYTON
®
GLASS
REINFORCED
ECTFE
GASKET
VITON
CORK-NITRILE
EPDM
VITON
CORK-NITRILE
EPDM
VITON
EPDM
FARM / MARINE
INDUSTRIAL / PETROLEUM PRODUCTS
including some solvents.**
PLATING / PHARMACEUTICAL
and other stringent applications
• VISCOSITIES UP TO 2000 SSU
•
QUALITY ENGINEERED THERMOPLASTIC
CONSTRUCTION
• TWO POSITION PUMP HANDLE
Handle can be mounted above the pump or below.
Much easier to operate on a truck or high tank.
• CONTROLLED DISCHARGE RATE
The pump discharges approximately one (1) quart on
every complete forward and backward cycle.
• TAMPER PROOF HANDLE
Can be padlocked to protect against unauthorized
use.
• SUCTION LIFT: Tested for 15 ft. minimum
DISCHARGE HEAD: Up to 25 ft.
• SELF-LUBRICATING TEFLON
®
(TFE) PISTON RING
Operates wet or dry for long life
• BARREL BUNG ADAPTER - 2" NPT Polyester is
standard on HP models. Halar
®
standard on HR and
HH models. 2" buttress in polypropylene optional.
Pump snaps in. No need to rotate pump to install.
Consult
Factory
PRICE
OTIONAL
DISCHARGE
SPOUT
OPTIONAL FILTER
CAPSULE AND
DISCHARGE
SPOUT
INTERNAL METAL PARTS:
316 stainless steel for
corrosion resistance
STAINLESS SUCTION
SCREEN: protects the
pump from solids.
8' EPDM, w/polyester elbow & nozzle
8' Nitrile (Buna-N), w/polyester elbow & nozzle
8' PVC black vinyl, w/polyester elbow & nozzle
8' Cross linked polyethylene, w/polyester elbow & nozzle
8' Cross linked polyethylene, w/Halar elbow & nozzle
8' EPDM, w/Halar elbow & nozzle
8' Nitrile (Buna-N), w/Halar elbow & nozzle
8' PVC, w/Halar elbow & nozzle
2 pc. 1" polyester, 34" long w/polyester coupling & TFE tape
2 pc. 1" TFE, 34" long w/Halar coupling & TFE tape
2 pc. 1" UHMW polyethylene#, 34" long w/Halar coupling
1 pc. 3/4" PVC flexible, 35" long (prevents tearing of drum liners)
Polyester
Halar
Polypropylene/polyester assembly for HP pump
Polypropylene/Halar assembly for HR pump
Polypropylene/Halar assembly for HH pump
Polypropylene filter capsule with pleated 1.3 ft.²
polypropylene media, Halar pump adapter,
Halar discharge spout.
Replacement filter capsule
Consult
Factory
Consult
Factory
Consult
Factory
Consult
Factory
Consult
Factory
Registered trademarks: Teflon, Tefzel - DuPont; Viton - DuPont Dow Elastomers;
Ryton - Phillips Chemical; Halar - Ausimont
OPTIONAL EQUIPMENT
MODEL
-
DESCRIPTION
DISCHARGE HOSES (ADD TO MODEL NO. & PRICE CODE NO.)
PRICE
SUCTION TUBE (ADD TO MODEL NO. & PRICE CODE NO.)
# Ultra High Molecular Weight polyethylene
BUTTRESS-BUNG ADAPTER (2" BUTTRESS x 2" NPT) (ADD TO MOD. & PCN)
FILTER CAPSULE-PAC
DISCHARGE SPOUT (ADD TO MODEL NO. & PRICE CODE NO.)
TYPICAL MODEL: HPN-2AM & PRICE CODE NO.: 59-0002-2AM
1.0 Nominal
0.2 Nominal
1.0 Nominal
0.2 Nominal
PP-404AC-4
Page 2