Spec Sheet

BULLETIN
PP-613Q
Jan 2018
SERIES ‘G’
HORIZONTAL PUMPS
SELF-PRIMING CENTRIFUGAL PUMPS FOR
TRANSFER AND RECIRCULATION OF:
CHEMICAL SOLUTIONS / WASTE TREATMENT
PHOTOGRAPHIC SOLUTIONS (inorganic)
Close-coupled to electric motor
with polypropylene baseplate
• Will reprime to 10 feet.
• Noryl® or Ryton® engineered thermoplastic construction.
Glass fi lled for acid or base solutions.
See chemical resistance chart for for compatibility.
• Non-metallic solution contact.
available with Noryl and Ryton pumps.
• Flow rates to 100 GPM or 73 feet TDH@ 60 Hz.
• Shaft sleeve is the same material as the pump.
Isolates pump shaft from solutions.
• Combination 2” OD / 1 1/2” ID NPT connections.
BSP threads available for Noryl pump only.
The self-priming Series ‘G’ pump is made in either Noryl® or Ryton®, providing a maximum range of
chemical resistance. It is available with stainless steel or titanium internal hardware or complete non-me-
tallic solution contact. The pump comes standard with stainless steel external hardware. It is
protected with a basket type strainer in either Polypropylene or ECTFE. The large cover makes initial
priming and removal of the strainer quick and easy. The cover is the same material as the pump or it can
be ordered in clear Lexan®.
After initial prime the Series ‘G’ pump will lift up to 10 vertical feet (3.1m) and will remain primed even
after shutdown. This pump also features an open, non-clogging impeller which is molded in
conjunction with the shaft sleeve, thus isolating the shaft from solution contact. The self-priming ability,
chemical resistance, light weight and basket strainer make this an ideal chemical transfer, waste
treatment, emergency/backup or fi lter pump.
AQUACULTURE
LOBSTER FARMING
FISH PONDS
PUMPING FROM
PONDS, PITS, TANKS,
SUMPS, ETC.
RECIRCULATION,
MIXING, FILTRATION,
ETC.