Operation Manual

SOLVING PROBLEMS (cont.)

Check Suggested solution Further checks, if there is still a problem

Can you hear stereo

sound?

YES

First check that the program is likely to have

stereo sound (an old movie, for example, may

not be in stereo).

Check the TV Guide Setup Menu, Audio

settings (see page 34). The Stereo Output

may be set to “Mono”. Change it to “Stereo”.

If the TV is mono, you will only hear stereo sound if you

have a stereo audio ampliﬁer and speakers or home

theater connected to the stereo VCR or set-top. This is

also the case if the stereo TV has only an RF input.

Can you see and hear a

DVD that you are trying

to play?

YES

Please see the next page

For the signal to loop through your set-

top from a DVD (or similar equipment) to

reach your TV, you must activate baseband

loopthrough by turning off your set-top..

Check that all the audio and video cables are securely

and correctly connected, including any to a home theater

receiver that you may be using to enhance the sound.