Operation Manual

34
USING THE SETUP MENUS
The Setup menus allow you to make further settings to control how your set-top works. These are available from your TV Guide and should
be fully described in the information provided by your service provider. There may also be on-screen information to explain these menus.
However, please note there are certain items and settings that may affect how your set-top and TV work. See the table below for
information about these.
Item Setting Options Notes
Cable Box
Setup
Front LED
Display
Current Time,
Current Channel
If setting is “Current Time”, the time displays on the front panel when your set-top is
switched on. If setting is “Current Channel”, the program channel number displays..
AC Outleti Switched,
Unswitched
If setting is “Switched”, the AC outlet on your set-top’s rear panel is on when your set-top
is on, and off when your set-top is off, so any TV that is therefore receiving its power from
this AC outlet will switch off when your set-top is turned off. If setting is “Unswitched”,
the AC outlet is always on, so any TV that is receiving its power from this AC outlet will
continue to receive power whether your set-top is switched on or off.
RF Bypass Off, On You must set this to “On” in order to use RF Bypass.
For information about RF Bypass, see page 19.
Configuration Allows you to view the configuration of your set-top.
Audio Default Audio
Track
Channel Default,
English, Espagñol,
Français, Português
Set the language track that your set-top first attempts to use when tuning to a channel.
“Channel Default” means your set-top will use the default audio track for the program.
Selecting a language means it will use the corresponding language track, if available.
Optimal
Stereo
Selecting this option enables your set-top to regulate the volume to minimize sudden
changes in volume, for example during a commercial break.
Audio
Output
TV Speakers,
Stereo, Advanced
If you select “Advanced”, further settings are displayed, allowing you to set the Compression
(to None, Light or Heavy) and the Stereo Output (to Mono, Stereo or Matrix Stereo).
Screen position This allows you to adjust how the picture displays in the TV screen.
Other items and options may be available on these screens. The menus may be subject to change in the future, as your set-top advances with new technology.