Operation Manual

27
MAKING USER SETTINGS (cont.)
2. Press the R button. Either “Yes” (switched on) or “No” (switched off) displays. If you can see the
on-screen menus, the menu shown right appears.
3. If you want to change the setting, press U or D. Press the select button to confirm the choice
and change to the new setting.
4. Press the L button. The front panel displays “PiLL” again.
To continue making the settings, see the next section.
NOTE
16:9 picture in a 4:3 transmission
Sometimes 4:3 transmissions may contain a 16:9 picture, with black borders at the top and bottom. On a
16:9 TV this may display with black borders all the way around the picture. To remove these borders, you
can use the “Zoom” button on the remote control. See the example below. For more information about
using Zoom, see page 33.
4:3 transmission
16:9 TV with no automatic
detection of 4:3,
Auto-pillarbox switched off
16:9 TV with no automatic
detection of 4:3,
Auto-pillarbox switched on
Use 'Zoom' to increase the picture size.
(Note: the picture may lose some
definition due to the expansion)
Auto Pillarbox?
YES
NO