User Manual

16
Pairing your remote control with your set-top
Before using your set-top with your TV, you must pair your remote control with your set-top.
1. Put the two AA batteries provided into your remote control.
2. Turn on your TV and set-top.
3. Press and hold the two buttons (the select buttons) on the front of your set-top. You’ll see a message on
your TV showing you that your set-top is trying to pair with a remote control. Your TV shows you which two
buttons to press on your remote control.
4. Press and hold the two buttons on your remote control, as instructed on your TV screen. You’ll see a message
on your TV confirming that your remote control has been paired with your set-top.
NOTE
If you don’t complete the process within two minutes, you’ll have to start again. Pressing EXIT on your remote
control also ends the pairing process.
CONNECTING THE EQUIPMENT (cont.)
NOTES
Your cable TV service-provider
determines the digital channels,
services, and screen information
that you see on your TV when you
use your set-top and its remote
control.
Consult the information supplied
by your cable service-provider for
details on how to make the most of
the digital cable services. Also read
the operating instructions that are
supplied with your remote control.