USER GUIDE Pace PX022ANx BRINGING TECHNOLOGY HOME www.pace.
CONTENTS SAFETY INFORMATION................................................................................................... 3 IMPORTANT SAFETY INSTRUCTIONS............................................................................ 3 Regulatory information............................................................................................... 5 REAR PANEL................................................................................................................... 6 CONNECTING THE EQUIPMENT...
SAFETY INFORMATION This digital set-top box has been manufactured and tested with your safety in mind. However, improper use can result in potential electric shock, property damage or fire hazards. To avoid defeating the safeguards that have been built into your set-top box, please observe the precautions discussed in this document.
SAFETY INFORMATION (cont.) In addition to the Important Safety Instructions, please read the Safety Information below. Power sources The model number, serial number, and electrical rating of this set-top box are on a label on its base. You must operate your set-top box only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company.
SAFETY INFORMATION (cont.) Safety aspects of connections To ensure correct operation, use this set-top box only with the Pace-approved power supply unit provided. If you use an unapproved alternative, you will invalidate the warranty. Full details of the rear panel are on page 6. Connecting Do not connect your set-top box (or any other equipment such as a TV or DVD player) to the power supply until you have properly connected all the other cables.
REAR PANEL Cable In From cable service-provider Ethernet For connection to a home network Cable Out RF output to TV (or VCR) HDMI In HDMI ® video and audio input SD Video Out Composite video output for SDTV USB For connection to USB device HDMI Out To TV HDMI video and audio output CC S/N: XXXXXXXXXXXX Power (Make this connection last of all) DOCSIS MAC: XX XX XX XX XX XX CC UA: XXX XXXXX XXXXX XXX Audio Out Audio outputs (stereo, L and R) Digital Audio Out Optical S/PDIF audio output CableCARD™
CONNECTING THE EQUIPMENT Possible setups In order for you to view programs broadcast in high-definition, your set-top box must be connected to a suitable HDTV or computer monitor. Your equipment should have been connected up by your installer. However, if you need to disconnect and reconnect your equipment, read pages 8 and 9. There are two typical connection setups shown: • Setup A for an HDTV with an optional home theater receiver.
CONNECTING THE EQUIPMENT (cont.) Setup A - Home theater system with HDTV (HDMI connection) Setup A uses an HDMI connector to connect to the HDTV. This displays the highest quality picture on your HDTV and also means there will be no picture degradation on any copy-protected programs (provided the link remains secure – see page 7).
CONNECTING THE EQUIPMENT (cont.) Setup B - Home theater system, VCR, and DVD player with HDTV (HDMI connection) Setup B uses an HDMI connector to connect to the HDTV. This displays the highest quality picture on your HDTV and also means there will be no picture degradation on any copy-protected programs (provided the link remains secure – see page 7).
CONNECTING THE EQUIPMENT (cont.) WARNINGS Do not connect your set-top box (or any other equipment such as a TV or VCR) to the power supply until you have properly connected all the other cables. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety.
FRONT PANEL Power button (on top cover) To turn your set-top box on/off. Power light Lights blue when your set-top box is on and lights red when your set-top box is in standby. NOTES Your cable TV service-provider determines the digital channels, services, and screen information that you see on your TV when you use your set-top box and its remote control. Consult the information supplied by your cable service-provider for details on how to make the most of the digital cable services.
TERMS AND CONDITIONS FOR USE OF SOFTWARE (“TERMS”) THE PRODUCT TO WHICH THESE TERMS RELATE (THE “PRODUCT”) INCORPORATES SOFTWARE WHICH IS OWNED BY PACE plc (“PACE”) OR ITS THIRD PARTY LICENSORS (THE “SOFTWARE”). BEFORE USING THE PRODUCT PLEASE READ THESE TERMS. IF YOU DO NOT AGREE TO THESE TERMS YOU MAY NOT USE THE PRODUCT AND SHOULD IMMEDIATELY RETURN THE PRODUCT TO YOUR SUPPLIER. THESE TERMS ALSO APPLY TO ANY MODIFICATIONS, UPDATES OR SUPPLEMENTS TO THE SOFTWARE PROVIDED TO YOU.
TERMS AND CONDITIONS FOR USE OF SOFTWARE (“TERMS”) (cont.) D. Termination These Terms are effective until terminated. You may terminate these Terms by returning the Product to your supplier. These Terms will terminate automatically without notice if you fail to comply with these Terms or any other written agreement between you and Pace. Upon termination you must return the Product to your supplier. E. Disclaimer 1.
www.pace.com Pace and are trademarks and/or registered trademarks of Pace plc.
