User Guide

6
XG1-P (PX001BNT and PX001BNM) USER GUIDE DRAFT (501-100190x)
REAR PANEL
Comp Out*
Component video output
for analog HDTV
Audio Out
Audio outputs
(stereo, L and R)
Cable In
From cable
service-provider
1394*
For connection to
a 1394-compatible
device
eSATA
For connection
to an optional
external hard disk
Power
(Make this
connection
last of all)
Digital Audio Out
Electrical (coaxial)*
and optical S/PDIF
audio output
Ethernet
For connection to
a home network
HDMI HD To TV
HDMI video and
audio outputs
USB
For connection
to USB device
CableCARD™ module
(behind cover) Removal
will interrupt your service
To TV
RF output to
TV (or VCR)
HDMI Input 1 & 2
HDMI
®
video and
audio inputs
Video Out
Composite video
output for SDTV
Cable In
Connect the cable service here.
To TV
Connect to the RF/antenna input on your TV or VCR (optional).
Comp Out*
If your HDTV does not have an HDMI connector, but has component video (YPbPr) inputs, connect your HDTV here.
Video Out
Connect to the composite video input on your VCR (or a standard TV).
Audio Out
For future use during servicing of your set-top box.
Digital Audio Out:
Electrical* and Optical
Connect the lower socket to the optical digital audio input on optional digital audio equipment, such as an audio
decoder or home theater receiver. Or connect the upper socket to the electrical digital audio input on optional digital
audio equipment, such as an audio decoder or home theater receiver.
HDMI HD To TV
If your HDTV has an HDMI connector, connect it here for a digital audio/video connection (instead of using the audio
and three analog component video (YPbPr) connectors).
HDMI Input 1 and
HDMI Input 2
Connect another optional HDMI devices (allowing the devices’ outputs to loop through the set-top box to the TV).
USB
Connect to the L and R audio inputs on your stereo TV, stereo VCR, or optional stereo amplifier.
eSATA
Connect an optional external hard disk.
Ethernet
Connect your set-top box into an Ethernet home network (optional).
1394*
Connect to a TV with a 1394 port or to any other 1394-compatible device.
+12V DC In Power
Connect your set-top box’s power supply unit here. Make this connection last of all.
CableCARD module
Removal will interrupt your service.
*Not present on PX001BNM
Note also that the funtionality of some of the connectors depends on the cable service provider.