User's Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Overview
- 2.1 Overview of ONT-2-E4xxxi Multi-service Residential Gateway Series
- 2.2 EPON Multi-service Gateway Series Hardware Interface
- 2.3 Supported Residential Gateway (RG) Features
- 2.3.1 Network Address Translation (NAT)/NAPT (Network Address Port Translations)
- 2.3.2 Dynamic Domain Name System (DDNS)
- 2.3.3 Dynamic Host Configuration Protocol (DHCP) Client and Server
- 2.3.4 Security Firewall and Rich Packet Filtering
- 2.3.5 Advanced Quality of Service,
- 2.3.6 Virtual Server
- 2.3.7 Flexible Management Interfaces including Web GUI
- 2.4 Additional Features
- 2.5 Product Specifications
- 2.6 Physical Characteristics
- Chapter 3 Hardware Description
- 3.1 Package Contents
- 3.2 Accessories
- 3.3 ONT-2-E4xxxi Multi-service Residential Gateway Series Enclosure
- 3.4 LED Diagnostics on Front Panel
- 3.5 Rear Panel and Interface Description
- 3.6 Ethernet Connections
- 3.7 EPON SC/APC Fiber Optic Network Interface
- 3.8 Voice Telephony Interfaces (Standard Telephone)
- 3.9 RF Overlay
- 3.10 Power
- Chapter 4 Installing the ONT-2-E4xxxi Multi-service Residential Gateway Series
- 4.1 Cautions and Warnings
- 4.2 Pre-Installation Check
- 4.3 Tools and Materials Needed
- 4.4 System Requirements
- 4.5 Situating the EPON Multi-service Gateway ONT
- 4.6 Wall-Mounting the ONT Using the Fiber Tray
- 4.7 Wall-Mounting the ONT without the Fiber Tray
- 4.8 Vertical or Tower Mounting the ONT
- 4.9 Connecting the EPON Optical Fiber to the ONT
- 4.10 Connecting Telephones to the EPON Multi-service Gateway ONT
- 4.11 Connecting Premises LAN Ethernet Wiring
- 4.12 Connecting Power and Powering Up the ONT
- 4.13 Connecting to the GUI Interface of the ONT
- Index
ONT-2-E4xxxi Multi-service Residential Gateway Series Hardware Installation Guide
16 UNRELEASED DRAFT TM 87-10879 Rev. A
LED
Color
Status
Description
LAN1, LAN2,
LAN3, LAN4
(Data Link/Activity)
Dark Off
No link has been established at the LAN interface, or
the interface is administratively disabled by the service
provider.
Green-Solid On LAN port is up.
Green-Blinking Blinks
Data is being transmitted or is received.
VoIP
(all models except
ONT-2-E4000i)
Dark Off
The ONT has failed to register with the Call Agent (SIP
server), or
Voice services have not been provisioned.
Green-Blinking Blinks To be determined.
Green-Solid On To be determined.
Voice Diagnostics:
Phone1
Phone2
(all models except
ONT-2-E4000i)
Dark Off
There is no phone is connected to the indicated line, or
The phone port is disabled, or
The phone port is enabled, but the attached phone is
on-hook.
Green-solid On To be determined.
WiFi (Wireless)
(ONT-2-E4020iWn
ONT-2-E4021iWn)
Green-Solid On A wireless connection is established via the web GUI.
Green-Blinking Blinks Data is being transmitted or is received.
WPS
Dark Off WiFi Protected Setup (WPS) – status to be determined.
USB
Dark Off Reserved for future use.
RF
(for RF-capable
models:
ONT-2-E4021i,
ONT-2-E4021iWn)
Dark Off RF video is disabled.
Green-solid On RF video is enabled with 1550 nm RF output.
3.5 Rear Panel and Interface Description
Ports on the ONT-2-E4xxxi Multi-service Residential Gateway Series are located on the rear panel. See
Figure 2 for a picture of the ports on an ONT-2-E4020iWn.