User's Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Overview
- 2.1 Overview of ONT-2-E4xxxi Multi-service Residential Gateway Series
- 2.2 EPON Multi-service Gateway Series Hardware Interface
- 2.3 Supported Residential Gateway (RG) Features
- 2.3.1 Network Address Translation (NAT)/NAPT (Network Address Port Translations)
- 2.3.2 Dynamic Domain Name System (DDNS)
- 2.3.3 Dynamic Host Configuration Protocol (DHCP) Client and Server
- 2.3.4 Security Firewall and Rich Packet Filtering
- 2.3.5 Advanced Quality of Service,
- 2.3.6 Virtual Server
- 2.3.7 Flexible Management Interfaces including Web GUI
- 2.4 Additional Features
- 2.5 Product Specifications
- 2.6 Physical Characteristics
- Chapter 3 Hardware Description
- 3.1 Package Contents
- 3.2 Accessories
- 3.3 ONT-2-E4xxxi Multi-service Residential Gateway Series Enclosure
- 3.4 LED Diagnostics on Front Panel
- 3.5 Rear Panel and Interface Description
- 3.6 Ethernet Connections
- 3.7 EPON SC/APC Fiber Optic Network Interface
- 3.8 Voice Telephony Interfaces (Standard Telephone)
- 3.9 RF Overlay
- 3.10 Power
- Chapter 4 Installing the ONT-2-E4xxxi Multi-service Residential Gateway Series
- 4.1 Cautions and Warnings
- 4.2 Pre-Installation Check
- 4.3 Tools and Materials Needed
- 4.4 System Requirements
- 4.5 Situating the EPON Multi-service Gateway ONT
- 4.6 Wall-Mounting the ONT Using the Fiber Tray
- 4.7 Wall-Mounting the ONT without the Fiber Tray
- 4.8 Vertical or Tower Mounting the ONT
- 4.9 Connecting the EPON Optical Fiber to the ONT
- 4.10 Connecting Telephones to the EPON Multi-service Gateway ONT
- 4.11 Connecting Premises LAN Ethernet Wiring
- 4.12 Connecting Power and Powering Up the ONT
- 4.13 Connecting to the GUI Interface of the ONT
- Index
ONT-2-E4xxxi Multi-service Residential Gateway Series Hardware Installation Guide
TM 87-10879 Rev. A UNRELEASED DRAFT 13
Chapter 3 Hardware Description
This chapter describes the package contents, accessories, the ONT enclosure, LED indicators used for di-
agnostics, power adapter, and types of interfaces on the EPON Multi-service Gateway ONT.
Note:
Figures in the description of the product are for reference only.
3.1 Package Contents
The following product items are shipped as part of the package contents.
Table 4 Package Contents for ONT-2-E4xxxi Multi-service Residential Gateway Se-
ries
Item
Part Number
Description
ONT-2-E4xxxi-** or
ONT-2-E4xxxiWn-
**
Where
** is one of the following:
-US United States
-UK United Kingdom
-EU Europe
-AU Australia
EPON Multi-service Residential
Gateway ONT.
Power adapter
The appropriate power adapter, compatible
with the ONT part number selected, will be
shipped as part of the package.
Four power adapter options, based
on the ONT part number options.
Note:
The ONT-2-E4020iWn and ONT-2-E4021iWn have two attached antennas. Do not attempt to detach
the antennas.
CAUTION!
• This ONT is for indoor use only.
• Only use the power adapter that comes with the product. Using a different voltage rating
power adapter may damage the ONT.
• Do not open the case of the EPON Multi-service Gateway ONT. The exception is the
protected PON compartment may be opened. There are no customer-serviceable parts
inside the unit. If the ONT needs repair, contact the appropriate service provider for re-
placement instructions.
3.2 Accessories
The following are accessories that compliment the EPON Multi-service Gateway ONT and may be ordered
separately from Aurora Networks.