User's Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Overview
- 2.1 Overview of ONT-2-E4xxxi Multi-service Residential Gateway Series
- 2.2 EPON Multi-service Gateway Series Hardware Interface
- 2.3 Supported Residential Gateway (RG) Features
- 2.3.1 Network Address Translation (NAT)/NAPT (Network Address Port Translations)
- 2.3.2 Dynamic Domain Name System (DDNS)
- 2.3.3 Dynamic Host Configuration Protocol (DHCP) Client and Server
- 2.3.4 Security Firewall and Rich Packet Filtering
- 2.3.5 Advanced Quality of Service,
- 2.3.6 Virtual Server
- 2.3.7 Flexible Management Interfaces including Web GUI
- 2.4 Additional Features
- 2.5 Product Specifications
- 2.6 Physical Characteristics
- Chapter 3 Hardware Description
- 3.1 Package Contents
- 3.2 Accessories
- 3.3 ONT-2-E4xxxi Multi-service Residential Gateway Series Enclosure
- 3.4 LED Diagnostics on Front Panel
- 3.5 Rear Panel and Interface Description
- 3.6 Ethernet Connections
- 3.7 EPON SC/APC Fiber Optic Network Interface
- 3.8 Voice Telephony Interfaces (Standard Telephone)
- 3.9 RF Overlay
- 3.10 Power
- Chapter 4 Installing the ONT-2-E4xxxi Multi-service Residential Gateway Series
- 4.1 Cautions and Warnings
- 4.2 Pre-Installation Check
- 4.3 Tools and Materials Needed
- 4.4 System Requirements
- 4.5 Situating the EPON Multi-service Gateway ONT
- 4.6 Wall-Mounting the ONT Using the Fiber Tray
- 4.7 Wall-Mounting the ONT without the Fiber Tray
- 4.8 Vertical or Tower Mounting the ONT
- 4.9 Connecting the EPON Optical Fiber to the ONT
- 4.10 Connecting Telephones to the EPON Multi-service Gateway ONT
- 4.11 Connecting Premises LAN Ethernet Wiring
- 4.12 Connecting Power and Powering Up the ONT
- 4.13 Connecting to the GUI Interface of the ONT
- Index
ONT-2-E4xxxi Multi-service Residential Gateway Series Hardware Installation Guide
10 UNRELEASED DRAFT TM 87-10879 Rev. A
2.4 Additional Features
• The aesthetically-pleasing enclosure features a streamlined compact design, with an optimized
rear access for a physically-secure fiber PON port.
• All connectors are on the rear-side of the unit. Connections include four (4)
10/100/1000BASE-T data, two (2) POTS, a backup power, and an 12 V
DC
input. A USB port is
reserved for future use.
• A separately sold, thin, modular fiber slack management tray, when mounted underneath the
unit, securely hides excess fiber and protects it from potential abuse or destruction.
• All ONTs support desk or wall mount or vertical (tower) mount installations.
• LED Indicators—Ample LED indicators are available and conveniently located on the
top-front of the unit, easily in view by the user to monitor important status information. See the
LED indicator action descriptions the Product Specification Section.
2.5 Product Specifications
Table 2 provides a summary of the features and product specifications for the ONT-2-E4xxxi Mul-
ti-service Residential Gateway Series.
Table 2 Product Specifications for ONT-2-E4xxxi Multi-service Residential
Gateway Series
Function/Parameter Unit ONT-2-E4000i ONT-2-E4020i
ONT-2-E4021i &
ONT-2-E4001i ONT-2-E4020iWn ONT-2-E4021iWn
Network Interface
Optical Interface
SC/APC
Fiber Type
G.652 Single-mode
Transmit Wavelength
nm
1310 ±20
Transmit Launch Power
(min-max)
dBm +0.5 to 5.0 +0.5 to 5.0 +0 to 5.0 +0.5 to 5.0 +0 to 5.0
Transmit Spectrum Width
nm
1
Receive Wavelength (Data)
nm
1490 ±10
Receive Wavelength (RF Vid-
eo)
nm 1555 ±10 1555 ±10
Receive Sensitivity @1490
(min-max)
(measured with a PRBS
2
23
-1 test pattern @2.488 Gbps and ER=
10dB = 10
-10
)
dBm -8 to -28
Receive Sensitivity @1550nm
(min-max) (linear operating
range)
dBm
-8 to +2
-8 to +2
1550 nm Optical Isolation
(1400 - 1500 nm)(min)
dB
30
30
Receive Overload @ 1550nm
(min)
dBm
+5
+5
Downstream/Upstream Rate
Gbps
2.488/1.244 Turbo Mode
Telephony