User's Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Overview
- 2.1 Overview of ONT-2-E4xxxi Multi-service Residential Gateway Series
- 2.2 EPON Multi-service Gateway Series Hardware Interface
- 2.3 Supported Residential Gateway (RG) Features
- 2.3.1 Network Address Translation (NAT)/NAPT (Network Address Port Translations)
- 2.3.2 Dynamic Domain Name System (DDNS)
- 2.3.3 Dynamic Host Configuration Protocol (DHCP) Client and Server
- 2.3.4 Security Firewall and Rich Packet Filtering
- 2.3.5 Advanced Quality of Service,
- 2.3.6 Virtual Server
- 2.3.7 Flexible Management Interfaces including Web GUI
- 2.4 Additional Features
- 2.5 Product Specifications
- 2.6 Physical Characteristics
- Chapter 3 Hardware Description
- 3.1 Package Contents
- 3.2 Accessories
- 3.3 ONT-2-E4xxxi Multi-service Residential Gateway Series Enclosure
- 3.4 LED Diagnostics on Front Panel
- 3.5 Rear Panel and Interface Description
- 3.6 Ethernet Connections
- 3.7 EPON SC/APC Fiber Optic Network Interface
- 3.8 Voice Telephony Interfaces (Standard Telephone)
- 3.9 RF Overlay
- 3.10 Power
- Chapter 4 Installing the ONT-2-E4xxxi Multi-service Residential Gateway Series
- 4.1 Cautions and Warnings
- 4.2 Pre-Installation Check
- 4.3 Tools and Materials Needed
- 4.4 System Requirements
- 4.5 Situating the EPON Multi-service Gateway ONT
- 4.6 Wall-Mounting the ONT Using the Fiber Tray
- 4.7 Wall-Mounting the ONT without the Fiber Tray
- 4.8 Vertical or Tower Mounting the ONT
- 4.9 Connecting the EPON Optical Fiber to the ONT
- 4.10 Connecting Telephones to the EPON Multi-service Gateway ONT
- 4.11 Connecting Premises LAN Ethernet Wiring
- 4.12 Connecting Power and Powering Up the ONT
- 4.13 Connecting to the GUI Interface of the ONT
- Index
ONT-2-E4xxxi Multi-service Residential Gateway Series Hardware Installation Guide
TM 87-10879 Rev. A UNRELEASED DRAFT 7
Chapter 2 Overview
This chapter provides an overview of the supported features, product specifications, and system re-
quirements for the ONT-2-E4xxxi Multi-service Residential Gateway Series, which comprise the
ONT-2-E4000i, ONT-2-E4020i, ONT-2-E4021i, ONT-2-E4020iWn, ONT-2-E4021iWn, and
ONT-2-E4001i models.
2.1 Overview of ONT-2-E4xxxi Multi-service Residential Gateway Series
The ONT-2-E4xxxi Multi-service Residential Gateway Series of Optical Network Terminals provide
basic and optional features supporting current and future business and consumer connectivity needs for
Data, IPTV including High-definition TV, Voice over IP (VoIP), and Triple-Play services. All ONTs in
the family support the latest Residential Gateway features, including high-speed EPON and
Turbo-EPON communication to the Cable Operator or ISP WAN network, firewall security, efficient
provisioning, and up to 1 Gbps (1000BASE-T) connectivity to four independent LANs on the customer
premise. Optional features for Wi-Fi, Voice over IP, and RF Video Overlay are also available.
The ONT-2-E4021iWn is the full-feature EPON ONT Residential Gateway, featuring a 4-port RJ-45
10/100/1000BASE-T Gigabit Ethernet switch, 2 POTS ports for VoIP, 1 RF Video Overlay port, and
IEEE 802.11n wireless (Wi-Fi) access. The ONT-2-E4020iWn is the same basic unit as the E4021iWn
without the RF Video; the ONT-2-E4021i provides RF Video without Wi-Fi; the ONT-2-E4020i has no
Wi-Fi and RF Video; the ONT-2-E4000i only provides the four 1000BASE-T ports.
See Table 1 for a brief overview of interfaces, ports, VoIP, RF video, Wi-Fi, data, and IPTV services on
each EPON Multi-service Gateway ONT. The various features are described in subsequent sections of
this guide.
Table 1 EPON Multi-service Gateway ONT Supported Services and Features
Multi-service
Gateway ONT
Gigabit
Ethernet
(GE) Inter-
faces
POTS Port
VoIP Ser-
vice
RF Overlay
Port
RF Video
Service
Wi-Fi
Service
(Wire-
less)
Data and
IPTV
Residential
Gateway (RG)
Features
ONT-2-E4000i 4 0 NA NA X X
ONT-2-E4020i 4 2 NA NA X X
ONT-2-E4021i 4 2 1 NA X X
ONT-2-E4001i 4 NA 1 NA X X
ONT-2-E4020iWn 4 2 NA X X X
ONT-2-E4021iWn 4 2 1 X X X