User Manual

Configuring your local network
The default local IP address of your gateway is 192.168.1.254. The DHCP server is
enabled by default and your connected hardware items will have an IP address in the range
192.168.1.1 to 192.168.1.253. The default lease time for an IP address is 240 minutes. To
change these default settings:


 Click LAN under the Configuration sub-heading. The LAN Configuration page shows up.


 If necessary, change the IP address of your gateway and the subnet mask of your wireless
network.


 If necessary, change the IP address range. You can also change the default lease time,
which represents the number of minutes you can use the assigned IP address before the
DHCP lease expires.


 To disable the DHCP server, click Disabled next to DHCP server.
Some LAN clients require fixed IP addresses. For such clients, you must reserve and
assign an IP address on the DHCP server. These reservations are permanent lease
assignments, which are used to ensure that a specified LAN client on your network is
always assigned the same IP address. To reserve an IP address for a LAN client:


 Navigate to the Fixed IP addresses assigned by the DHCP server panel.


 Click + Add a DHCP rule.