User Manual
Table Of Contents
- Contents
- Introduction
- Installing your gateway
- Troubleshooting
- Regulatory and Safety Information
8 Chapter 2 Installing your gateway
Connecting the broadband interface through
the DSL port
To connect your gateway to a Asymmetric Digital Subscriber Line (ADSL) wall jack:
1. Connect one end of the phone cable/twisted pair cable to the DSL port on your
gateway.
2. Connect the other end of the cable to the DSL port of the DSL filter, which must be
plugged into the ADSL-enabled wall jack outlet.
After your gateway recognizes the connection, the BROADBAND indicator blinks
green for a few seconds and then turns steady green.
Wall Ethernet
socket
USB
LAN
1
2
3
4
W
A
N
DSL
FXS
1&2
RESET
POWER
1/0
Broadband
router
or