Owner's Manual

Radio Replacement &
Steering Wheel Control Interface
for Select Hyundai Vehicles
RP4.2-HY11
© 2018 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
Pacific Accessory Corporation
Page 3
Rev: 2
Date: 092118
Default Steering Wheel Control Programming
IMPORTANT! The interface comes pre-programmed for all of the vehicles factory SWC functions and does not require
programming unless you wish to re-assign the SWC functions, utilize short press long press dual command functionality or assign
the programmable 12v output to a SWC button. The SWC can always be restored to default settings by pressing and releasing
the program button on the side of the interface once and waiting 7 seconds for the LED to ash 3 times.
Optional Steering Wheel Control Programming
If you wish to re-assign the SWC functions, utilize short press long press dual command functionality or assign the programmable
12v output to a SWC button, the interface must be programmed in the specic order shown in the chart on page 4. If you come
across a function in the chart that your steering wheel does not have, or you do not want to program, press and release the
programming button on the side of the interface to skip that function. The LED will ash off and on conrming that you have
successfully skipped that function and are ready to proceed to the next one.
Short Press Long Press Dual Command Functionality
This feature allows you to assign two aftermarket radio functions to each of the vehicles SWC buttons. It can be used with as
many of the buttons as the user likes or none at all. When this functionality is implemented, quickly pressing and releasing a SWC
button will initiate the short press command while pressing and holding a SWC button for longer than two seconds will initiate the
long press command. Please note that no long press commands are programmed by default. If you wish to assign dual command
functionality to the SWC please follow the programming steps on the next page.
Programmable 12v Output
The red/white wire on the interface can be programmed via the RadioPRO app to do a pulsed or latched 12v output which can
then be assigned to any of the vehicle’s factory SWC buttons. When assigned, the factory SWC button will activate the pulsed or
latched output to control external accessories. Please refer to page 6 for more details on how to use the app to set this feature.
Default SWC Button Assignments
A
lpine JVC Kenwood Clarion Pionee
r
Son
y
Fusion
Volume + Volume + Volume + Volume + Volume + Volume + Volume + Volume +
Volume - Volume - Volume - Volume - Volume - Volume - Volume - Volume -
Source Source Source Source Source Source Source Source
Track + Track + Track + Track + Search + Track + Track + Track +
Track - Track - Track - Track - Search - Track - Track - Track -
Voice Voice Voice Voice Voice Voice Voice Mute
Mute Mute Mute Att Mute Mute Mute N/P
Phone Answer Receive Receive Answer Send Mute Answer/End Audio
Phone End End Reject Voice End End Reject/Source Powe
r
Steering Wheel Controls
DIP
1 2 3 4
ON
Alpine JVC Kenwood Clarion Pioneer/Other Sony Fusion
1 2 1 and 2 3 1, 2, and 3 4 1 and 4
SET RADIO DIPSWITCHES TO THE ON POSITION