Owner's Manual
Pacific Accessory Corporation
CM1
Chime Module
For
the
08-2
or
OS-280SE
Interface
eM
1 Installation
Instructions:
Unplug the OS2-RAD cable from the interface
prior to wiring the
eM
1.
+12volts
CM1
Vel-Constanl
+12volts
81:
Blk
•
Chassis
ground
.----_'::._=__=__=__=__=__=__=__=_~
Org -
~S~2~~;~
,....-----1
General Motors Class
II
Chime Module
Must
be
used with the OS-2 or OS-2BOSE Interface
Pacific Accessory Corporation· Santa Ana. CA 92705
OS2-RAD
1.
Connect the
CM1
's BLACK wire to the OS2-RAD BLACK wire.
2.
Connect the CM1's
YELLOWwire
to the OS2-RAD
YELLOW
wire
3.
Insert
the
CM1
's
ORANGE wire
with
the
MOLEX
pin
into
pin location #12
of
the OS2-RAD (18 pin) MOLEX plug.
Do
not use force! Pin will snap in with minimal effort,
if
inserted
correctly.
4.
Plug the OS2-RAD plug back into the interface.
5.
VVhen
first powered up, the
CM1
will chime one time to indicate
proper power connection. All warning chimes are now retained.
To
pin# 12
6-15-06
Pacific Accessory Corporation - 1502
S.
Santa Fe Street, Santa Ana, CA 92705
techsupport@pac-audio.com • Voice: 714-835-3022 • Fax: 714-835-3233 • www.pac-audio.com