Installation Guide
Page 1
L.O.C.PRO™ LP6-4
Line Output Converter
Before You Start
Replacing your radio? PAC also produces RadioPRO
™
which is a radio replacement solution, with steering wheel
control retention built-in. This greatly expedites the installation of a new radio into your vehicle.
To see if there is a RadioPRO
™
interface for your vehicle, visit www.pac-audio.com and search "Radio PRO".
Installation Instructions
The professional way to integrate
your new amplier or radio.
General Overview
The L.O.C.PRO™ LP6-4 can be used for either replacing an OEM radio and retaining the factory amplied
system or adding ampliers to a system that does not have RCA outputs. Level matching is achieved using
precision stereo gain dials and will enable proper adjustment of audio output of the radio for optimum system
performance. Differential inputs also allow for use in OEM BOSE and other premium system scenarios.
Speaker Level Input to RCA Level Output
Speaker level input to RCA level output is the most commonly used conguration for the LP6-4.
Use this when you need to create RCA level outputs from a source that only has speaker level outputs.
The RCA input connectors on the main harness will not be utilized for this type of installation, we suggest
cutting them off the harness 3 inches from the RCA end so they can be saved and used for a future installation.
After all the connections are made on the remaining wires, skip to the level adjustment section of this manual.
Cut away RCA ends for wired speaker level inputs
Front Right Audio Input
Rear Le Audio Input
Front Le Audio Input
Audio Ground Input -
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ + + + + + + +
+ + + + + + + + + + + +
+ + + + + + + + + + + + + + + + + + + + + + + +
+
+
+
+
+
+
+
+
+
+
+
+
+
+ +
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ + + + + + + +
+ + + + + + + + + + + +
+ + + + + + + + + + + + + + + + + + + + + + + +
+
+
+
+
+
+
+
+
+
+
+
+
+
+ +
+
+
+
+
Rear Le Output
Rear Right Output
Front Le Output
Front Right Output
(
OPTIONAL
)
Rear Right Audio Input
Note: If using large RCA connectors that are difcult to insert into housing, unsnap the
L.O.C.PRO™ cover and remove end panel insert around RCA outputs.
3"








