Owner's Manual

Overhead LCD retention cable for
GMLAN Full Size Truck’s & SUV’s Rear Seat Entertainment (RSE)
(When keeping the factory Head Unit See Reverse Side for Instructions)
Video Input
Right Audio Input
Left Audio Input
Video Output
Right Audio Output
Left Audio Output
Shield
Audio / Video Input
From Rear Panel
Audio / Video Output
to Overhead LCD
Video
Left Audio
Right Audio
GMRVD
The GMRVD is a plug and play cable that routes the audio and video signals to the
Rear Seat Entertainment (RSE) LCD. The audio and video inputs located in the rear
of the center console are also terminated as RCA jacks behind the radio at this
connector.
Note: This cable is intended for use in conjunction with an OS-4 to retain all safety
and convenience systems. The vehicle should be equipped with a Panasonic
Overhead LCD and IR system, in which the DVD player was part of the AM/FM/CD
receiver. The OS-4 is needed to power the IR headphone system.
• When using a headunit with source control (A/V inputs and A/V outputs) - connect the cables labeled “Audio/
Video input from Rear Panel” to an A/V input (i.e. A/V 1 in, A/V 2 in). The cables labeled “Audio Video output to
Overhead LCD” will then connect to the A/V output of the new source unit. The single black wire is a shield, connect
this to ground.
• When using a standalone DVD player (only A/V outputs) - In this case, connect the A/V outputs to the cables
labeled “Audio/Video output to Overhead LCD”. The rear panel A/V inputs will not be used and the black shield wire
should be connected to ground.
Pacific Accessory Corporation - 1502 S. Santa Fe Street, Santa Ana, CA 92705
[e-mail] • Voice: 714-835-3022 • Fax: [phone] • www.pac-audio.com
DISCLAIMER: Under no circumstances shall the manufacturer or the distributors of the GMRVD be held
liable for consequential damages sustained in connection with the GMRVD. The manufacture and it’s dis-
tributors will not, nor will they authorize any representative or any other individual to assume obligation
or liability in relation to the GMRVD other than its replacement.
Pacific Accessory Corporation - 1502 S. Santa Fe Street, Santa Ana, CA 92705
[e-mail] • Voice: 714-835-3022 • Fax: [phone] • www.pac-audio.com
DISCLAIMER: Under no circumstances shall the manufacturer or the distributors of the GMRVD be held
liable for consequential damages sustained in connection with the GMRVD. The manufacture and it’s dis-
tributors will not, nor will they authorize any representative or any other individual to assume obligation
or liability in relation to the GMRVD other than its replacement.
J1850
1850
Class
ass
ss
2
2
2
VPW
PW
Class
Clas
22
Cl
2
J1850J1850
J
J1850
1
0
100011
10001
1
10111
101111
111
001001
001001
101100
101100
1011
111010
111010
000110
000110
110111
1011
110111
001100
001100
1
Arbitr
tr
ation
ation
EO
EOD
E
CRC
CRC
10001
00011
10111
01111
00100
001001
101100
101100
1
1
0
00
0
0
0
1
11
1
0
0
1
1
1
10
0
01
1
0
00
0
1
0
0
1
0
0
0
111010
111010
1
111
000110
000110
110111
110111
10111
001100
001100
1
10
1
00
00
1
0
10
1
00
1
00
Clas
Cla
ss
2
C
l
Class
las
s
2
C
a
J1850
1850
850
1
0
J1850
1850
Class
ass
ss
2
2
2
VPW
PW
Class
Clas
2
2
Cl
2
J1850
J1850
J
J1850
1
0
100011
10001
1
10111
101111
111
001001
001001
101100
101100
1011
111010
111010
000110
000110
110111
1011
110111
001100
001100
1
Arbitr
tr
ation
ation
EO
EOD
E
CRC
CRC
10001
100011
10111
101111
1
00100
001001
101100
101100
1
1
1
0
00
0
0
0
1
11
1
0
0
1
1
1
10
0
01
1
0
10110
10110
00
0
1
0
0
1
0
0
0
111010
111010
111
000110
000110
110111
110111
10111
001100
001100
1
10
1
00
00
1
0
10
1
00
1
00
Clas
Cla
ss
2
C
l
Class
las
s
2
C
a
J1850
1850
850
1
0
GMRVD
Video Output
Right Audio Output
Left Audio Output
Audio / Video Input
From Rear Panel
Video Output
Right Audio Output
Left Audio Output
Audio / Video Output
to Overhead LCD
The GMRVD is a plug and play cable that allows aftermarket monitors and IR headphones to be connect-
ed to the factory entertainment system. The GMRVD is connected behind the factory head unit.
Aftermarket
Monitor
Adding Aftermarket Monitors to
the Factory Entertainment System
(When Replacing the Factory Head Unit See Reverse Side for Instructions)
• When using an aftermarket monitor, connect the cables labeled “Audio Video output to Overhead LCD” to the aftermarket Monitor video
input. If installing aftermarket IR headphones, connect the RED and WHITE RCAs to the audio input of the aftermarket IR headphones. The cables
labeled “Audio Video input From Rear Panel” are not used.