Installation Guide

ManualsBrandsPAC ManualsBack-Up & Dash CamerasBack-Up Camera and Navigation Unlock Interface for Select Dodge, Jeep, and RAM Vehicles - Blue

Reverse Camera Input and Navigation Unlock

Interface for Chrysler / Dodge / Jeep / RAM Vehicles

BCI-CH41

PAC-audio.com

Pacific Accessory Corporation

Rev: V6

Date: 100319

Page 3

Common Use Examples With Setup

Adding Reverse Camera Only

• DIP switch 1 = ON

• DIP switch 2 = OFF

• DIP switch 3 = OFF

• DIP switch 4 = User Preference

• No additional programming needed as Programmable Output 1

(10A) is set to “Accessory” by default (use to power cameras)

Adding Reverse Camera and Navigation Unlock

• DIP switch 1 = ON

• DIP switch 2 = OFF

• DIP switch 3 = ON

• DIP switch 4 = User Preference

• No additional programming needed as Programmable Output 1

(10A) is set to “Accessory” by default (use to power camera)

Adding Reverse Camera and Rear Media

• DIP switch 1 = ON

• DIP switch 2 = ON

• DIP switch 3 = User Preference

• DIP switch 4 = User Preference

• No additional programming needed as Programmable Output 1

(10A) is set to accessory by default (use to power cameras and

video source)

Adding Reverse Camera and a Bed Camera using the AVS21

(sold separately)

• DIP switch 1 = ON

• DIP switch 2 = OFF

• DIP switch 3 = OFF

• DIP switch 4 = User Preference

• PC Settings

• Blind Spot Camera = OFF.

• Front Camera = OFF

• Programmable Output 1 (10A) = Any Camera Active or

Accessory (use to power cameras)

• Programmable Output 2 (1A) = Forced Reverse Camera

(use to trigger AVS21 when the forced reverse camera

feature is triggered via the SWC or the on-demand switch)

• Programmable Output 3 (1A) = OFF

Adding Blind Spot Cameras using the VS41 (sold separately)

• DIP switch 1 = ON if adding rev cam; OFF if already equipped

• DIP switch 2 = OFF

• DIP switch 3 = User Preference

• DIP switch 4 = User Preference

• PC Settings

• Blind Spot Camera = User Preference, can’t be OFF

• Front Camera = Off

• Programmable Output 1 (10A) = Any Camera Active or

Accessory (use to power cameras)

• Programmable Output 2 = OFF

• Programmable Output 3 = OFF

Adding Blind Spot Cameras and a Front Camera using the VS41

(sold separately)

• DIP switch 1 = ON if adding reverse camera; OFF if already

equipped

• DIP switch 2 = OFF

• DIP switch 3 = User Preference

• DIP switch 4 = User Preference

• PC Settings

• Blind Spot Camera = User Preference, can’t be OFF.

• Front Camera = User Preference, can’t be OFF.

• Programmable Output 1 (10A) = Any Camera Active or

Accessory (use to power cameras)

• Programmable Output 2 (1A) = OFF

• Programmable Output 3 (1A) = OFF

Adding Reverse Camera, Blind Spot Cameras, and a Front

Camera using the VS41 (sold separately), a bed camera using

the AVS21 (sold separately), Navigation Unlock, and Rear Media

• DIP switch 1 = ON

• DIP switch 2 = ON

• DIP switch 3 = ON

• DIP switch 4 = User Preference

• PC Settings

• Blind Spot Camera = User Preference, can’t be OFF.

• Front Camera = User Preference, can’t be OFF.

• Programmable Output 1 (10A) = Accessory (use to power

cameras and video source)

• Programmable Output 2 (1A) = Forced Reverse Camera

(use to trigger AVS21 when the forced reverse camera

feature is triggered via the SWC or the on-demand switch)

• Programmable Output 3 (1A) = OFF

Reverse Camera Rear Media Navigation Unlock Feature Settings Menu

1 2 3 4

Set DIP switches to the ON position to activate the corresponding features.

Set DIP switches to the OFF position for any features that are not desired.