Instructions / Assembly

LMS-2-14 Page 2
1. BSR-15-0 Standard Stainless Aircap(.055)
BSR-15-2 or 4 Optional Aircaps(.073 & .093)
2. BUS-12 Stainless Aircap Nut
3. U-0 Standard Stainless Tip(.055)
U-2 or 4 Optional Tips(.073 & .093)
Fluid Body
Angle adjustment
Set Screws
4. U-3675 Hook
5. H-153 Needle Set Screw
6. U-3674 Tee Adapter
7. U-3676 Set Screw (2)
8. U-3678 Plug (Nylon)
9. U-3679 Gasket (PTFE)
10. AN Nylon Washer
11. LM-4 Nut (Gold Anodized)
12. MT-21 O-Ring
17. U-3557 St. St. Fluid Body - RIGHT
18. U-3558 St. St. Fluid Body - LEFT
19. 59-30 PTFE Packing Assembly (2)
20. U-2493 Cylinder Shell Assembly
21. U-3677 Needle
22. U-3664 PTFE Piston Assembly
23. U-2500 Spring
24. U-3669 Rear Cap
25. U-3670 Needle Stop Adjustment Knob
26. USP-QT (QT./.946 l) Plastic bottle Assembly
The Set Screw must be loosened before
Adjusting needle stop,then retightened.
5/64” Allen Wrench (Not Included)
( DO NOT OVERTIGHTEN SCREWS)
(Set Screws set at factory). Loosen
Set Screws before adjusting Fluid
Bodys then retighten.
1/16” Allen Wrench(Not Included)
LM-14S
(Stainless Steel)
Close up view of
Packing Orientation
Optional Items: (Not Included)