User Manual
E%4D0= 000,/0, 1, 2 or 3
E;;74.,>4:9Apply materials in small or confined areas.
E7?4/(4=.:=4>CThin to Medium
•>:84D,>4:9 External
*&$!!#&&$!
1. ! Fan Aircap (Select Size above)
1A. !% Stainless Fan Aircap (Select Size)
2. ' Aircap Nut
2A. '% Stainless Aircap Nut (Optional)
3. ' Stainless Tip (match aircap size)
4. ' Stainless Needle
!&$!$"'!#&&$!
5. $ Round Aircap (Select Size above)
5A. $% Stainless Round Aircap (Select Size)
6. ' Aircap Nut
6A. '% Stainless Aircap Nut (Optional)
7. ' Stainless Tip (match aircap size)
8. ' Stainless Needle
!&$! *!#&&$!
E %4D01 only
E;;74.,>4:9Broad Coverage
E 7?4/(4=.:=4>CLight
E 7?4/#<0==?<0Fluid pressure must be 5 to 10 P.S.I. lower than
air atomizing pressure.
9. % Slotted Cap
10. ' Aircap Nut
11. $ Aircap
12. ' Aircap Nut
13. ' Stainless Tip
14. ' Stainless Needle
$!%$&!#&&$!
E %4D04 only
E;;74.,>4:9Gritty, Abrasive Material
E7?4/(4=.:=4>CLight Abrasives
15. ! Fan Aircap (for Carbide Tip)
16. ' Air Cap Nut
17. ' Carbide Insert Stainless Body Tip
18. ' Carbide Insert Stainless Needle
$!%$&$"'!#&&$!
E %4D04 only
E;;74.,>4:9Gritty, Abrasive Material
E7?4/(4=.:=4>CLight Abrasives
19. $ Aircap (for Carbide Tip)
20. ' Aircap Nut
21. ' Carbide Insert Stainless Body Tip
22. ' Carbide Insert Stainless Needle
#,20 %#$+" #"!!&% 1:<'?>:8,>4.%;<,C?9
Spray Heads for the A-JU- Automatic Spray Guns are available in several different styles, some of which are available with
Stainless Steel components. The C.F.M. requirements range from .25 to 3 C.F.M. @ 30 lbs. air pressure. NOTE: When either
fluid Tip or fluid Needle is worn and requires replacement, it is recommended that both items be changed for best results. All
Tips and Needles are made using 303 Stainless Steel. Carbide Tips and Needles are available for use with abrasive materials.