User Manual

ManualsBrandsP.G.Electronics ManualsElectronicsDual Band Bidirectional Amplifier

P.G. TM0040AE

electroni

OPERATOR'S MANUAL

DUAL BAND BIDIRECTIONAL AMPLIFIER

MODEL A289

P/N 001-0289-001

(CABLE POWERED)

AND

P/N 001-0289-002

(LOCAL POWERED)

APRIL 2002

RESTRICTION ON DISCLOSURE OF DATA

This document contains information proprietary to P.G.

Electronics and any disclosure or use of this information or any

reproduction of this document for other than the specific purpose

for which it is intended is expressly prohibited except as P.G.

Electronics may otherwise agree in writing.

REV. A

Toronto, Ontario

Summary of content (7 pages)

PAGE 1
P.G. TM0040AE REV. A electroni OPERATOR'S MANUAL DUAL BAND BIDIRECTIONAL AMPLIFIER MODEL A289 P/N 001-0289-001 (CABLE POWERED) AND P/N 001-0289-002 (LOCAL POWERED) APRIL 2002 RESTRICTION ON DISCLOSURE OF DATA This document contains information proprietary to P.G. Electronics and any disclosure or use of this information or any reproduction of this document for other than the specific purpose for which it is intended is expressly prohibited except as P.G. Electronics may otherwise agree in writing.
PAGE 2
P.G. TM0040AE GUARANTEE This unit is guaranteed for a period of one year from the date of shipment against failure due to defective parts or improper assembly. This guarantee is limited to replacement of defective material and does not cover damages or other costs resulting from the use of this material whether used correctly or otherwise.
PAGE 3
P.G. TM0040AE TABLE OF CONTENTS Paragraph Page SECTION 1. GENERAL INFORMATION 1.1 1.1.1 1.1.2 1.1.3 1.1.4 1.2 INTRODUCTION Scope of Manual Purpose of Equipment Physical Description Electrical Description TECHNICAL SUMMARY 1-1 1-1 1-1 1-1 1-1 1-3 SECTION 2. THEORY OF OPERATION 2.0 2.1 2.2 2.2.1 2.2.2 2.2.3 GENERAL DESCRIPTION FAULT REPORTING General Report Type Fault Conditions 2-1 2-1 2-3 2-3 2-3 2-4 SECTION 3. INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS 3.1 3.2 3.3 3.
PAGE 4
P.G.
PAGE 5
P.G. TM0040AE SECTION 1. GENERAL INFORMATION 1.1 INTRODUCTION 1.1.1 Scope of Manual - This manual is intended to familiarize personnel working with the Dual Band Cellular/PCS Bidirectional Amplifier A289 with all pertinent aspects of the amplifier. Included in this manual are a brief physical description, a technical summary, installation information and operating data. 1.1.2 Purpose of Equipment - The A289 amplifier is used as a drop-in booster for cellular and PCS signals carried on 50 ohm coax cable.
PAGE 6
P.G. TM0040AE 1.1.4.3 - If a FAULT condition is detected the unit transmits a low frequency identification code along the cable center conductor. The burst transmission is repeated at approximately 80 second intervals, while a fault condition exists. 1.1.4.4 - If a NORMAL condition exists in the amplifier a low frequency OK identification code will be transmitted on the cable at intervals of approximately 80 minutes. 1.1.4.
PAGE 7
P.G. TM0040AE 1.2 TECHNICAL SUMMARY TABLE 1-1 Performance Characteristics and Salient Features of the A289 Cellular/PCS Bidirectional Amplifier Parameter Specification 1. Input Power: 15 - 24 VDC @ 3.5A Max. (use PS288 for local powered unit) 2. Frequency Range*: (MHz) Cellular Uplink: Downlink: 824-849 869-894 3. Gain: 20dB ±1.5dB 4. Impedance 50 Ohms 5. VSWR 2:1 Typical, 3:1 Maximum 6. Composite Output Power Rating** (dBm) Cellular Uplink: Downlink: +9 +24 Uplink: +4 Downlink: +24 7.