Installation and Operation Manual

November 1999
5-2 M68334 Rev. A Tel-Link PMP - Remote Terminal Installation & Maintenance Manual
STEP 2. After unpacking the equipment, visually inspect the equipment for damage and ensure
that:
• All components mounted on the individual boards are secure.
• The circuit boards are not cracked.
• There are no loose leads.
• The shelf unit has not been dented or damaged in any way.
STEP 3. Dispose of as much packing material as possible. P-COM suggests that the user
retain at least one of each box with all packing materials. In the unlikely event that it is
necessary to return a unit, the user will possess the required packing material for safe
shipment of the unit.
STEP 4. Make claims for any damages incurred during shipment to the transportation company
involved in accordance with company procedures.
Table 5-1 - PMP Remote Terminal Equipment Parts List
REMOTE INDOOR UNIT (IDU)
Description Part Number Quantity
1 RU Remote IDU 28000-1,-2,-3 or -4 1
ATM Service Modules
Description Part Number Quantity
ATM Service Modules Interface Dependent 1
REMOTE OUTDOOR UNIT (ODU)
Description Part Number Quantity
Remote ODU Frequency Dependent 1
30 cm Parabolic Antenna Frequency Dependent 1
60 cm Parabolic Antenna Freqeuncy Dependent 1