Installation and Operation Manual

November 1999
M68334 Rev. A Tel-Link PMP - Remote Terminal Installation & Maintenance Manual 2-3
Figure 2-3 - Front Panel Overlays for ATM Service Modules
2.4 Remote Outdoor Unit (ODU)
Figure 2-4 illustrates a typical RF/Antenna configuration for the ODU. The packaging includes the following
components:
• ODU Enclosure
• RF Electronics
• ODU Controller Card responsible for controlling and monitoring ODU functions and for interfac-
ing with the IDU
The ODU is frequency agile so that the same ODU can typically be used throughout the entire allocated fre-
quency band. Subsequently, this reduces sparing levels.
The ODU meets all National Electrical Code requirements pertaining to lightning and power transients and
meets or exceeds FCC and ETSI regulations pertaining to conducted and radiated Electromagnetic Emis-
sions.
The ODU is sealed against the environment and is capable of functioning in ambient temperatures ranging
from -40°C to +60°C, with up to 100% relative humidity. The ODU can survive steady state winds of 40 m/
s with gusts to 55 m/s (89 mph/123 mph).