User's manual *Please read this user guide carefully before use* ★If you want to read the data, please use the original data cable★ (Other data lines may not be connected properly) * This machine must be charged with 5V voltage.
● User manual Shutdown interface Recording interface Video interface 1/ press the bright screen button Lightly to display the time, and it will go off after 15 seconds (the bright screen button cannot turn off the screen). 2/Press the button lightly, please do not press the button vigorously! 3/ The machine will reserve a little battery for use as a watch. When the battery is low, it can only display the time.
Shutdown interface Recording interface Video interface Video Function Video: put the switch to the video position, The screen as shown in the video interface, start video; Save: put the switch to the off position , The screen returns to the shutdown interface ,save video. Tip: In a well-lit environment, please aim the lens at the subject, keep a distance of more than 50cm from the subject and avoid jitter. This will result in natural colors, clear scenes, and stable images.
● Format (clear data) You can use formatting when the machine is faulty or you need to clear the data.
● Time Setting Set the machine time and record the Video time. Method 1： 1.Connect the machine with the computer, find the in the machine; 2.Copy the file to the desktop for backup, then double click the left button to open the synchronization tool. Then click Exit to exit; 3.In the case of constant power, the modified time will be maintained, and the machine needs to be reset after a lon g period of time.
Method 2： 1. Connected the machine to the computerFind the TIME text file (.txt) in the machine (if the time modification is unsuccessful, you can delete the TIME file directly and reconnect to the computer, and the time must be two digits); 2. Open the file, change the content of the file and write it at the beginning without leaving spaces.
● Charging (Notes) You can use a 5V charger or a computer to charge. When the machine is charging, the battery gauge is jumping; when the battery is full, the battery gauge shows full charge. The charging time is about 2 hours. Tip: If the machine has not been charged for a long time and the battery is too low, please use the charger to charge, otherwise you can use the computer to charge. ● Data connection The machine needs to be connected to the computer in a shutdown state.
● Function parameter Product type Voice recorder Battery Machine time Self-synchronization Charging time Around 2 hours Photo format JPG Video format AVI Voltage Battery capacity Camera resolution Video resolution Lens parameters F/NUMBER 2.25 FOV Environmentally friendly polymer lithium battery 3.
Because only the time function is retained when the battery is low, you should wait patiently for 2 hours after charging and try again. 3/Poor audio and video effects, blurred? The recording effect is better within 5 meters. The recording distance is about 2.3 meters. You can wipe the lens position before recording. Fingerprints can cause unclearness, and strong jitter can also cause blurring of the video. 4/ No files after video and recording? It may be caused by a memory file system error.
eject the machine on the computer or mobile phone first, and then unplug the machine to prevent unsuccessful file synchronization due to unplugging the machine directly. 6/ Do you need to reset the time when the machine is out of power? The machine will reserve a little battery for time use. It can be used for about 1 week. Please charge it in time. If it is completely out of power, you need to resynchronize the time.
