SDS

Material Safety Data Sheet
Report No.:STR13098102S Page 3 of 10
SEM.Test Compliance Service Co., Ltd.
3/F,Jinbao Commerce Building, Xin'an Fanshen Road,
Bao'an District, Shenzhen, P.R.C
Medical
Conditions
Aggravated by
Exposure
Not applicable
Reported as
carcinogen
Not applicable
Section 3 – Composition/Information on Ingredients
Polymer Li-ion Battery is a mixture.
Hazardous Ingredients
(Chemical Name)
Concentration or
concentration ranges (%)
CAS Number
Aluminum Foil(Al)
6.51
7429-90-5
Copper Foil (Cu)
10.37
7440-50-8
SBR (CF
2
-CF
2
)
n
0.35
9003-55-8
Poly Vnylidene Fluoride
PVDF(-[-CH
2
-CF
2
-]-
n
)
0.72 24937-79-9
Lithium Cobalt Oxide (Li CoO2)
40.1
12190-79-3
Graphite(C)
22.74
7782-42-5
lithium hexafluoroarsenate
(LiPF6)
18.54 21324-40-3
Carbon 0.42 7782-42-5
Carboxylmethyl Cellulose
(CMC)
0.25 9004-32-4
Note: CAS number is Chemical Abstract Service Registry Number.
N/A=Not apply.
Section 4 – First-aid Measures
Inhalation
If contents of an opened battery are inhaled, remove source of contamination or
move victim to fresh air. Obtain medical advice.
Skin contact
If skin contact with contents of an open battery occurs, as quickly as possible
remove contaminated clothing, shoes and leather goods. Immediately flush with
lukewarm, gently flowing water for at least 30 minutes. If irritation or pain persists,
seek medical attention. Completely decontaminate clothing, shoes and leather
goods before reuse or discard.
Eye contact
If eye contact with contents of an open battery occurs, immediately flush the
contaminated eye(s) with lukewarm, gently flowing water for at least 30 minutes
while holding the eyelids open. Neutral saline solution may be used as soon as it is
SEM. Test Compliance